channel master software

This is for standard / Legacy LNBs If you need dish pro simply use channel master and convert. Enjoy!

I Do a Channel Scan to sat 110 and sat 119, I set the CaID mappings manual for all channels in my Coolsat 5000, I upload the channel list to my PC and open with Channel Master, I apply my Channel Template but all my CaID mappings settings reset to AUTO.

Need Sonicview HD 8000 Channel Master software. My unit the picture jerk a little down and back on anyone have that experience wish someone can help me. Thank you.

Fortec How To's - Take a Look! -------------------------------------------------------------------------------- A MENU SETUP Below FOR 110 & 119 & Nimiq 1,3 91.0W SATELLITES WITH TWO SEPARATE LNB's & ONE DiSEqC OR A 22Khz SWITCH. Or A DISH PRO LNB, and no motor to move the dish YOU MAY NEED...

Here is a great how to l came across hope this helps some out! c/p Step by Step guide for the sd card!!! Format SD Card: First, you must place the SD Card into the pansat receiver go to main menu and select “SD Memory” and the pansat receiver will format your card into three directories.a) CH...

hi guys I got a viewsat xtreme vs2000 and it was workin fine, then i load Dbpsw-090227x.pgm about 1 week ago and the receiver shows autoroll many times but never get image or sound. I tried to turn on or off autoroll but it does not work either. It is viewsat v2000 the same viesat...

How To Use Channel Master with SV360P USE AT YOUR OWN RISK 1) Upload your channel list from STB to USB stick. It will upload in *.bin format. NOTE: You cannot reload this uploaded channel list in *.bin format back to your STB without first converting it to *.cmproj file format. 2) Upload from...

Cascading Switches -------------------------------------------------------------------------------- To add LNB's or receivers, we can cascade switches with LNB's A cascade is done when one switch is connected to another switch... That's a cascade... Each cascade will double the downstream...

hello i have a few questions 1st one is why do my boxes have different channel names but they are the kind? like one box will say HBO and the other will say TV300. next question is when loading the channel master do i need to do it before i load bin file or after? every time i try it makes all...

Ch Editor187 (Pansat 2700A or 2500-2700) Ch Editor187 (Pansat 2700A or 2500-2700) This is a Channel Edit program that can be used same as Channel Master. I am posting it for those who have issues using Channel Master or running CM on there computer. Same rules apply as Channel Master when...

hi all used the Fwank7_Jvvh-Team-PUFF_V203_F_EMU_.bin on my reciver..seems that Channel master isnt working on it as soon as i unplug my channels are gone ......today I tried the haddad_V203_PUFF_F_EMU.bin but with that getting ROLLING PUFF.....is there a step i missed ?????... Thanks in advance

Fwank7_Jvvh-Team-PUFF_V203(V-2) -------------------------------------------------------------------------------- Thanks to Jvvh5897 for showing us the way once again. I have tested the following personally on 2 recievers for over 10 hours. -Don't lose channel list at all not even after...

Hello all, I've read and learned tons in the past month on this site and thank everyone ahead of time for the help in starting from scratch. I have a pansat 2700a w/ dish 500 w/ dpplus twin lnb setup. scanning 119 and 110. Good signal 87% and signal 99% on both. Been getting some channels...

Tronics v202_FEMU_PUFF C/P I have been testing this bin for about 2 hours and it seems to be working fine. As with the last FEMU bin there are a couple of issues that still are present. 1) if you power your box off for an extended amount of time ( during my testing 10 minutes was not a...

Tronics v202_FEMU_PUFF C/P I have been testing this bin for about 2 hours and it seems to be working fine. As with the last FEMU bin there are a couple of issues that still are present. 1) if you power your box off for an extended amount of time ( during my testing 10 minutes was not a problem...

OK question...with the new fix as any other what in the code ( if thats what its called) tells it not to or to allow something like Channel master...this bin will not accept it....what is the reason...(I guess though if you knew that it would work lol....anyways...is there any other channel...

Fwank7_Jvvh-Team-PUFF_V201_F_EMU(2) USE AT YOUR OWN RISK If peeps want a no PUFF roll fix then this bin is ok but there is issues with 2700 bin as well so it's probably as good as it gets for now. If you don't do the same steps that I will explain below you will get the "Scrambled or Bad...

After following yesterdays Casper7 instructions on the V201 bin load, The screen was black and the channel info would come up every now and then. Otherwise... nothing. I just did 1 more factory reset AFTER V201 was in and hooked back up to the TV...... Then 1 more blind scan. It stinks to...

JVVH5897_puff_201G C/p This is the third release 201e, 201f and now 201g, NOTE: I been running it, Here is what I did after loading 201g did a factory reset setup and scan so far no problem, Still Channel Master does not work, I can download my full name list I have but will not get any...

I have a CW650S Classic with version 1.48 pionted at AMAZONAS (61W) and up untill yesterday it was working well... I had save the working channeldatabase en did some editing with the channel master v1.20.3 ... After downloading it to the CW650S i noticed that it didn't descrambled the channels...