loaders

When I power unit on it alternates flashing 0000 then boot then a colon and repeats forever. I tried leaving it unplugged for over two weeks, still same result. I hooked up a null modem cable and it will download s/w and count down till it gets to A799 then flashes e010. Tried several factory...

How to load the I-Link 9500HD w/ Loader and null modem cable. 1)Down load the I-Link 9500HD Loader SUpdateHD201 and unzip (extract) the file. 2)Open program Update Tool Ver 2.01 3) Set up you com port (usually Com 1) 4)File Type: Application 5)Browse for IS 9500 HD_FAC.IMG (make sure you...

As the title states do not reboot your receiver or you will be stuck with "OFF SERVICE" the network will show as connected. This is a problem with users rebooting there receivers and not being able to reconnect to the server. This has apparently been reported and has been happening since as...

this unit will not reconize me send the new file (coolsat5000-rq-100.stb) to it using the CS_Legacy_Loader_4K_5K_6K is there maybe some trick that I need to know about on how to do this? So far I have been trying everything that I know of, I am using a straight 9pin male cable up to the null...

was watching tv went scrambled wrestling was good last night

I have a program called "YouTube Downloader app" and it doesn't seem to want to work with any of the videos that I need. Is there a better program, or even website, I can use to download videos from YouTube to my harddrive? I need them downloaded from the site for a presentation.

Hi, I'm a new to this and trying to get my Nfusion Phoenix going. I understand from a friend's friend that there's a file for this unit. It sounded so simple as he rattled on, but in the end I'm more confused. My unit is new and not been used. Could you guild me thru to set it up and running...

If you have a CNX Nano2 and you want it working again instead of using it as a doorstop we have the fix for IT TO getting it Going again.......check out how it works and all files included in the VIP FORUM.........If you are already a VIP THEN YOUR FIX IS THERE.......check out the link below...

Nano Premium Recovery utility

Sonicview Loader Verson V2.1 Version V2.2 loader for SV 8000 HD

hellow i have a cw 600s premium and i didnt update it in a long time im just wondering as of now does it still work the way it used to ? like so i can watch w/e ppv i want and such? and where can i find the lastest loader and bin for it? i tryed a loader from here but it comes out of winrar as a...

Box does not respond (appears dead) or displays On? If your box does not respond, or just displays "On", there is a good chance the current FIRMWARE on the box is somehow corrupt. This could be from a number of things. To solve it, you will need to flish it with the firmware again, but as you...

Please use this tool to upgrade your Openbox S9 HD if the box appears to be dead. :dirol:

Just getting on board again with FTA running VS Ultra that's locked up. Trying several sites looking for info. Got past the 4 dashes and now trying to find factory file. Will keep plugging along till something good happens!

Use @ your Own Risk this is for Receiver information only CASPER Specifications All info uploaded by Casper@preferredbypete Item Specification Type 1 x F Type, IEC169-24, Female Frequency Range 950MHz to 2150MHz RF Impedance 75 Ohm unbanlanced Signal Level -65 to -25 dBm LNB Power...

Hey, I have tried all the limesat files and I still do not get anything working for DN or B3V.. whats up? For those that do have it working, what are your configurations and what file are you using? thanks!

can someone give me a name of some private server that I should contact for the subscription? normally how much charges are expected to be monthly? you may PM me or answer in public. thanks.

CASPER i found the file on page 5 viewsat ultra files down load the file there nothing no files post date was 6 12 08 by casper :dirol::p

21st day of 2011 - 344 remaining Friday, January 21, 2011 KIWANIS ANNIVERSARY DAY It was on this day in 1915, in a little town called Detroit, Michigan (OK, it wasn’t such a little town), that the first Kiwanis club was formed. The name was taken from an old Indian term which, when translated...

-------------------------------------------------------------------------------- Extract to computer, click on .exe file, program will install onto your computer. Then whenever you need the loader, (actually only if really serious trouble with the Ilink) then click on icon program will start...