adrienshepard
Moderator
First open a web browser and go to 192.168.1.1
than you will have to login to your router on dd-wrt the default username and password should be
username:root
password:admin
once you've logged in click on nat/qos and than youle see a portforwarding page for application put the name of the program your portforwarding
and for port from put the port of the program your portforwarding do the same for port to set protocol to both and for ip address put your lan ip
your lan ip could be one of these
192.168.1.2
192.168.1.3
192.168.1.4
192.168.1.5
192.168.1.6
if you dont know your lan ip you can get it by opening command prompt and typeing ipconfig
look for IPv4 address now type the lan ip into the ip address box on dd-wrt and click enable
and click save than click apply changes
than you will have to login to your router on dd-wrt the default username and password should be
username:root
password:admin
once you've logged in click on nat/qos and than youle see a portforwarding page for application put the name of the program your portforwarding
and for port from put the port of the program your portforwarding do the same for port to set protocol to both and for ip address put your lan ip
your lan ip could be one of these
192.168.1.2
192.168.1.3
192.168.1.4
192.168.1.5
192.168.1.6
if you dont know your lan ip you can get it by opening command prompt and typeing ipconfig
look for IPv4 address now type the lan ip into the ip address box on dd-wrt and click enable
and click save than click apply changes
