CASPER
New member
K2HD Module
--------------------------------------------------------------------------------
Here are some directions on how to install a SK200V HD module on the K2HD motherboard.
1. disconnected K2 from a power source, (UNPLUG IT).
2. remove the cover from the K2.
3. locate the "module appearing board" on the mother board, See photo one)
4. remove the board by pulling it straight up, (it should take little work to do so).
5. Place the SK200V HD Module over the motherboard. Taking care to align the four pins from the motherboard and the corresponding four holes on the corner of the module.
6. now press firmly, (but gently) on the module until you feel it click into place.
7. replace the K2 cover
8 reconnect the unit and scan your HD channels
--------------------------------------------------------------------------------
Here are some directions on how to install a SK200V HD module on the K2HD motherboard.
1. disconnected K2 from a power source, (UNPLUG IT).
2. remove the cover from the K2.
3. locate the "module appearing board" on the mother board, See photo one)
4. remove the board by pulling it straight up, (it should take little work to do so).
5. Place the SK200V HD Module over the motherboard. Taking care to align the four pins from the motherboard and the corresponding four holes on the corner of the module.
6. now press firmly, (but gently) on the module until you feel it click into place.
7. replace the K2 cover
8 reconnect the unit and scan your HD channels
