KBOX K2 XTREME Review

[CASPER]

Tuner & Channel Decoder Input Connector
F-type, IEC 169-24, Female Loop through out
F-type, IEC 169-24, Female Frequency Range
950MHz ~ 2150MHz Input Impedance
75Ω unbalanced Signal Level
-65 to -25dBm LNB Power
13/18VDC, max.400mA 22KHz Tone
(22±2)KHz, (0.6±0.2)V DISEqC Control
V1.0/1.2/USALS Compatible Demodulation
QPSK Input Symbol Rate
2 ~ 45 Ms/s FEC Decoder
1/2, 2/3, 3/4, 5/6 and 7/8 with Constraint Length K=7
MPEG Transport Stream A/V Decoding Transport Stream
MPEG-II ISO/IEC 13818 Profile Level
MPEG-II MP@ML Input Rate
Max. 15Mbit/s Video Formats
4:3 LetterBox, 4:3 PanScan, 16:9 Video Resolution
720 x 576, 720 x 480 Audio Decoding
MPEG/MusiCam Layer & Audio Mode
Streo/Joint stereo/Mono Sampling Rate
32KHz, 44.1KHz and 48KHz

Main System Main Processor
Conexant Virgo(32-bit RISC CPU 180 MIPS) Memory
Flash-ROM : 2 MBytes

SDRAM : 32 MBytes

Audio / Video & Data IN/OUT Video
CVBS Video Output (RCA)

S-VHS Video Output (Mini-DIN)

Y/Pb/Pr Video Output (RCA) Audio L/R
RCA(Volume and Mute Control)

AC-3 Dolby Digital (RCA & Optical) RS-232C
9 pin D-SUB (Male) type, Transfer rate 115Kbps USB
USB 2.0 Host Support(2 Slots)

RF Modulator RF Connector
IEC 169-24, Female Frequency
CH 3 : 61.25MHz

CH 4 : 67.25MHz Output Channel
CH 3 / CH 4 TV Standard
NTSC-M Preset Channel
CH 3 (or TBD)

Software changeable by Menu

Front Panel Slot
1 Smart Card Slot

1 USB Host Slot Buttons
3 Buttons (CH UP/DOWN, STANDBY) Display
VFD(Vacuum Fluorescent Display)

Power Supply Input Voltage
AC 100 ~ 250V, 50/60Hz Type
SMPS Power Consumption
Max. 25W Standby Power
Max. 8W Protection
Separate Internal Fuse & Lighting protection

Physical Specification Size (W x H x D)
260mm X 55mm X 210mm Weight (Net)
1.2 Kg Operating Temp.
0°C ~ +45°C Storage Temp.
-10°C ~ +70°C