my dream box 100 i install file 214a and my box ,my box is v2 how i fix this problem?

file for my box is 219a b i install 214a b accident.

do a factory reset and it will bring it back to factory setting

https://preferredbypete.com/dm100s/18943-dreambox-dm100-v2-only-silver-text.html

everything you need is in the Dreambox 100 file as Sticky

hello i put the 219f and then 219a b my box come back to 214a all the time .

You need to load the 219 bin for v2. If your loader does not respond, you need to physically remove a resistor 562 from the receiver for it to work. I can send you the details after you tell me if the loader works or not. Check to see if the file uploads.. most probably the file will not upload. I believe you do need to remove the resistor. I can post the procedure with pics for it.

Also, load the 221A bin. It's the latest private file. I'll upload the file here soon.

Oops.. I just realized that his thread is very, very old. So sorry for the delayed response.. I will post a how-to to remove the resistor.

Uploaded the how-to.

johnpier3 said:

file for my box is 219a b i install 214a b accident.

Click to expand...

c/p

1 - Connect the receiver to network and do factory reset and then make
sure Dm100 has IP.
2 - Any PC that is connected to same network install a Free FTP server
software, I recommend XlightFTP server
3 - After installing the Xlight FTP server on PC, create a
username/password for the server
4 - Now that you have a FTP server ready on the PC with port 21.
Create a folder and share that folder on the FTP server and copy 219F
factory file on that folder.
5 - On Broken DM100 go to menu, Sw/update
6 - Change Domain to IP of the PC that is running ftp server
7 - Type username and password that you created on the server
8 - Press OK on S/W update
9 - It will scan the FTP server folder and show you the factory file.
10 - Select the 219F file and press Ok
11 - Press YES to save changes and after 25 sec, the receiver will boot
back into V2 mode