loaders

Sonicview New Bin update C/P Please note: The new Bins when loaded to the receiver comes up with a Banner "New Image Update - Please do not shut off receiver". You need to wait a few minutes and it will show sometimes "Network Adaptor connect" or it will staright away go into the picture on...

Hi I can't load the V1.2 to my newlink mark an error when I'm loading with the USB, can somebody help? And when I load de newlik file says ADAPTER OLD, theres something that I can do to fix it? The newlink version is 1.1 Thanks

Hello, has anyone tried the new file v 418 from this website? I tried it, it solved the "Software update" error but it did not detect the ihub. So it is not working. When you go to Menu, Installation, you don't see "Ip Config"

Hello, just got my Nano 2 and trying to set it up and update it. System Info says: MV 08.11 and LDR 1.08, can you tell me which exact files I would need give my system now to put onto my USB card for updating? Thanks so much!

Trying to setup 8000hd. I put a file on thumbdrive and loaded onto receiver, with no trouble. I loaded another file on the thumbdrive and tried to load to receiver, but it now tells me No device connected!. I tried another thumbdrive with the same results. I then loaded the hd5 with the loader...

Sometimes stuck on Booting sometimes front panel screen is blank. Tried unplugging everything then holding power button while switching on and nothing. Any suggestions If factory file needs to be loaded again via RS232 Cable how do you do this? Is some kind of loader program needed?

this is a little older but might be of help to (clean out) SV360 Premier_V0119P Must be loaded on all new SV-360 Premiers Hello everyone, Please perform the follow step to clean out the system, and be able to update later fix on the way.(this will auto factory reset) Please to do this you can...

Ihub Loader Utility & Ihub File V1.4 JUST IN CASE YOU NEED IT AS WELL DELL Here is the ihub software utility , You must load new software 1.4 to the Ihub for new bins to work , Please read the How to as you load the ihub software from the computer not with a usb stick

The only thing I haven't tried is taking the hub from rom100 to 1.4, 1.9. and then 2.2 because I don't have the 1.4 file. I have taken it from rom100 to 1.9 then 2.2. It's the only thing I HAVEN'T TRIED.

So your SV 360 P or E is not working. Perhaps you’re seeing only the "No Service or scrambled" message ? Perhaps you’re seeing the "Failed to Read Mac" message ? Perhaps you’re seeing the "Failed to get serial from server" message ? Perhaps you’re seeing the “Update Software” message ? Perhaps...

Ok..any ideas for this? I have a wm hub and 360p. I can't check the serial number because of wm hub. If I load the 263 file a set of numbers does come up. If I enter all 0's and re-load 420 file I get the fail to get serial from server message, 5 to 10 minutes later it goes away then tv rolls...

Limesat Loader and Loading Bins via RS232 It is now Confirmed: Limesat uses a Null Modem Cable. Limesat support has sent a workaround if the USB drive doesnt respond: To load the file using my RS232 port with the Limesat loader. Follow these steps: 1) Download and install Limesat Loader...

Here is the Loader for the VS Ultra, v1.1 Creative Genius enjoy all

view sat ultra loader not working in the loader files section help buttman need new loader for viewsat ultra

HELP I have a cnx mini and recently when it was down I tried to upgrade the files. I put the MIN_3.52 UNO in my cnx mini and I am using an ix 200 dongle. I also put the latest dongle file in ix-x00-E_A2.0.18_t1455.dgl and my cnx mini won't work. I realise now that they are the wrong files. I am...

how to update your mini made simple download the latest factory file.factory files are always sticky posted in the download section. download the latest file.this will be the first unstuck file in the list.you will see the dates to the right to insure its the latest. in a separate download...

HOW TO FIX OFF SERVICE PROBLEM FOR ALL CNX MODELS C & P from my_cnx For cnx nano2 only -load latest factory using bootloader upgrade -then load npn 1.29npn receiver file after receiver reboot -check ip setup,make sure you got ip,then do iks registration -if iks registration say ok -then turn...

HOW TO FIX OFF SERVICE PROBLEM FOR ALL CNX MODELS C & P from my_cnx For cnx nano2 only -load latest factory using bootloader upgrade -then load npn 1.29npn receiver file after receiver reboot -check ip setup,make sure you got ip,then do iks registration -if iks registration say ok -then turn...

HOW TO FIX OFF SERVICE PROBLEM FOR ALL CNX MODELS C & P from my_cnx For cnx nano2 only -load latest factory using bootloader upgrade -then load npn 1.29npn receiver file after receiver reboot -check ip setup,make sure you got ip,then do iks registration -if iks registration say ok -then turn...

HOW TO FIX OFF SERVICE PROBLEM FOR ALL CNX MODELS C & P from my_cnx For cnx nano2 only -load latest factory using bootloader upgrade -then load npn 1.29npn receiver file after receiver reboot -check ip setup,make sure you got ip,then do iks registration -if iks registration say ok -then turn...