loaders

HOW TO FIX OFF SERVICE PROBLEM FOR ALL CNX MODELS C & P from my_cnx For cnx nano2 only -load latest factory using bootloader upgrade -then load npn 1.29npn receiver file after receiver reboot -check ip setup,make sure you got ip,then do iks registration -if iks registration say ok -then turn...

Viewsat Ultralite, boot from USB How to Boot from Usb (frozen receiver) The Ultra Lite has a similar feature to the Ultra (Boot from usb) One thing not sure of is when it was added to file or if it has been there since first release. With the ultra it is only available with 3rd party bins...

hi guys i still cant get my viewsat ultra lite to load any file. when i power on 1st time i get nothing on the display, when i play with the switch in the back quickly i get characters on the display like upsidown A. , Y, 00 , ----, etc and they seem to cycle till i get back to no display. ive...

courteousy of fttalk if you have upgraded to 1.29 and still not getting picture, here are the steps to go back to 1.28: u will need a null-modem cable, a computer with serial port, and the CNX Loader tool u can use the 8.05 LDR file with the tool to restore the Factory file ; make sure you...

Hi, I broke the rule if it works don't fix it. My conaxsat nano2 was working good even though some missing channels. yesterday loaded the latest file, 1.29 npn but all channel got scrambled. I have reset stb to factory settings and tried to upload the prior working file 1.28 npn but i got the...

Ok so, I updated to the 2.1 iHub file, and then went in to load the 417, but since nothing was working, I thought I should see if the upgrade had done something to the serial number, as the last iHub file did. So I loaded file number 263, clicked ok, and now all that lights up is the...

Latest Recovery file for CNX Nano - File Recovery 7.10 LDR Loader CNX Nano Recovery Loader File Recovery 7.10 LDR Loader This is the latest recovery file.It should only be used to recover a dead or corrupted box.This is for the regular Nano.

CNX Recovery Loader Utility for All Models

DM100S_MAIN_NA_V220TA5C02 - Release INFO! ** This file has been tested on V1/V2 DM100 receivers ** ---- MAJOR FIXED ISSUES ---- - DISHPRO fix. - Added WEB UPLOAD option for MAIN file & Channel list (Currently it works with Microsoft Internet Explorer 8 Only) Web Password: 0101 (<a...

Hi guys, I haven't used my viewsat Pro receiver for a couple of weeks now and when I try to use it again for true fta it shows on the front of the receiver boot, I tried to put the factory firmware again but he didn't accept it and shows boot. Is there a way to make it run again and fix this...

VS_X-Tracker Loader_v1.60B

how to convert Nfusion Phoenix back after Gx3 Converion, loader will not work and jtag is not working ? :dirol: Thank you for all help.

Satzen z300 Sx 2.11 Loader to be use with serial cable

Hello everyone, I am a newbie to this site, but I have done some programming with a pansat that was given to me as a birthday gift. Just got me a Dreambox Dm100 w/ Bootloader 1.11 as of March 05/2010. The reason why I am here is to find out why my system is NOT working. In advance I would...

WF Latest Instructions & Troubleshooting c / p from other site end of C / P

is there a way to load file for db 100 v2...with out useing usb file all i get is failed comport.i used loader 32

Loading latest file I've been struggling with this latest file for SVs(in my case sv360elite_v406) & I'm sure others are having their share of frustrations too. I got the usb load to work once only. Then nothing overnight. I tried all the usual - system cleaner then factory file then latest...

i have the v2..i put usb bin in computer.opened it up and reboot computer hooked to box found new hard ware ..reboot again next got loader try auto com.but it comes up failed every time..tried to change com ports but it alway come back comport 1....any answer ..thanks

SatZen Z500_2.01 Loader File enjoy all :dirol:

AZBox_F1_v211L28_2k100307 Note New Loader For F1 Series Only