rca

This set does not have an Audio out/Audio Jack. I was told that there is an Adapter I could purchase that would allow me to use headphones. I purchased an Adapter, but I don't know exactly what I'm doing & it's not working... This is the advise/what I purchased: "I don't know how well it...

i just bought a new nfusion solaris disconnected my nova and hooked up the soalis installed new bin with cable worked for a little while then dump the 151 bin and went back to the 150 bin reloaded and same thing happened any ideas would be appreciated????

Echostar IRD Schematics -------------------------------------------------------------------------------- Contains schematics for the x700, x800, x900, 3000, 301.010/3100 , 301.013, 6000, 9000, and RCA DRD420 receivers.

Hi, I have a VS2000 Ultra Lite, and ever since Saturday night I have been getting vertical black lines on my TV screen for every channel. I have clear sound, but the picture is obstructed with the black lines. I loaded the latest file, even unplugged everything and let it sit all day while at...

I have a CS7100 and an SV360 elite. I'm trying to loop the 2, so when one is down, I don't have to change the cables on the back everytime. I have the cable going in to the "lnb in" on the back of the CS and then a cable going from the "lnb out" to the "lnb in" on the back of the SV. I also...

How to Clone 2700 a to another 2700 /Jrcpa DATA TRANSFER(RECEIVER TO RECEIVER) 1) connect null modem RS 232 cable (pin #2 & 3 twisted) between master and slave reciver. 2) leave the slave receiver power on condition all the time until completion of data transfer. 3) hook up the master...

I just got a vs ultra lite. There is no display on the tv. The remote turns the unit on and off so the batteries should be good. I have a working dn reciever and dish pro dish. I put a splitter in the cables so I could use either one. The cables work on the dn reciever but I can't get a display...

I just bought a 40" flatscreen. The picture coming from the vs through component cables is terrible. Any ideas or thoughts on how to improve the picture quality? I have an ultra!!

Planning on getting a VS 9000 reciever and would appreciate feedback on it and what dish goes with as well as set-up info. This is my first post at this site but I've been testing for two years with coolsat and viewsat_ultra. Free to air is a hobby that rules!!!!!!

XFactor X-1 Features Fully MPEG-2 & DVB Compliant for Free-To-Air Reception 216MHz 32-bit T2-RISC Processor 128Mbit SDRAM DVB-S Tuner with IF Signal Loop Through 4-Digit 7-Segment LED Display Front Panel USB Host Software Upgrade using USB Drive Very Fast Blindscan Speed Flexible...

Hi all, please be gentle, I have a Cambridge Audio 540R v2 which I'm wanting to control via serial port on pc, using LinuxMCE. Acording to CA's tech support the rs232c port on the receiver is for software updates only (540R v3 does support), and having tried that option (they originally told...

The New Viewsat MAXHD That’s right Viewsat is moving along to bring an affordable HD receiver. This unit is very sleek in design and the size of the VS Ultra. It comes in Black as pictured and has the same remote as the VS9000HD. The remote is not the only similarities it has to the...

New RCA Antennas Boost Flatness to Reception Ratio I've had a lot of success with RCA's A1500, a flat, living room friendly UHF/VHF antenna that's capable of receiving OTA HD. But it's not amplified, meaning it won't be right for many viewers who want to pump their signal a bit. Now RCA is...

I have a sound dropping problem. I have a viewsat 9000HD V2 with the latest relases 08-08-20 I have a Harman Kardon DPR-2005 sound system. Sound is sometimes stopped. This is more frequent on HD channels. I think it could be a compatibility problem between my DPR-2005 ans my 9000HD for the...

How to Recover From The E-01 Error To Recover from the dreaded E-01 ERROR simply follow the RS232 loading instructions But REPEAT step 4 and 5 twice before moving on to step 6 NOTE Always unplug your receiver before disconnecting or connecting your coax cable or RCA cables!!!! Failure to do...

How to Properly Load a Coolsat 7100 with a USB Flash Drive How to Properly Load a Coolsat 7100 with a USB Flash Drive NOTE ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver ! 1) Download and unzip both...

How to Properly load your Coolsat 7100 using the RS232 Cable NOTE ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver ! 1) Download and unzip both the ( F2ATV.com COOLSAT7100_FAC_V0112 and NorW latest...

How to Properly Load a K1Hero using a RS-232 Cable by CHRISTON. NOTE Always Unplug your receiver before disconnecting or connecting your coax cable or RCA cables. Failure to do so will damage your receiver. 1) Download and unzip both the ( K1Heros_FAC_V.1.19.00 ) and K1Hero latest bin...

this is relatively easy problem, but wondering if anybody else had this problem. my remote on a Pansat 2700a started acting goofy yesterday. only a few buttons will work, and is intermittent as to which ones. turned unit off with remote, and power switch on back over night. replaced...

How to Properly Load a KBox K1 Hero with a USB Flash Drive NOTE ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver ! 1) Download and unzip both the ( KBox V.1.19.00 Factory ) and KBox latest release NOTE...