ricklbert
Moderator
Blackrock 2.1.Update:
Update:
The Blackrock 2.1. is updated to work with the new iHub firmware and beta files.
Instructions for use with the IHUB
1. open Blackrock.exe
2. on the right put checkmark in No Proxy
3. on the right put checkmark in Auto Start
4. on the right press SAVE Settings
5. on the right press Start Proxy
6. at the bottom take note of the ip address cause you will add that to the sonicview
7. on the sonicview press Menu, go in IpConfig menu and change Use DNS to NO
8. on the next line it will now say Server IP ... put the ip that was at the bottom
of the Blackrock program
9. go down to Apply
10. Power off the receiver
11. Reach behind the Receiver and power it OFF and back ON and thats it
__________________
Update:
The Blackrock 2.1. is updated to work with the new iHub firmware and beta files.
Instructions for use with the IHUB
1. open Blackrock.exe
2. on the right put checkmark in No Proxy
3. on the right put checkmark in Auto Start
4. on the right press SAVE Settings
5. on the right press Start Proxy
6. at the bottom take note of the ip address cause you will add that to the sonicview
7. on the sonicview press Menu, go in IpConfig menu and change Use DNS to NO
8. on the next line it will now say Server IP ... put the ip that was at the bottom
of the Blackrock program
9. go down to Apply
10. Power off the receiver
11. Reach behind the Receiver and power it OFF and back ON and thats it
__________________
