do i have to convert files to load them in
- Thread starter waldo69
- Start date
CASPER
New member
did you follow the instructions
The file posted today is for sky TV only Waldo
Loading Bins
1) Copy Extracted Bins Factory 9.03 and Patch Sky 1.01 onto the USB Stick.
2) Insert USB Stick into front USB Port.
3) Go to Menu, Utility, USB and chose bin to load.
4) Load Factory Bin 9.03NPP.
5) Load Sky1.01.
6) Set up Satellites.
7) Scan sats.
8) Confirm CH 101 is up.
Network
1) Menu, Installation, Network
2) IP Set Up
3) Networking Setting: Auto
4) Apply
5) Wait for IPS to fill in
6) Exit
Click on CH 200 and watch TV
The file posted today is for sky TV only Waldo
Loading Bins
1) Copy Extracted Bins Factory 9.03 and Patch Sky 1.01 onto the USB Stick.
2) Insert USB Stick into front USB Port.
3) Go to Menu, Utility, USB and chose bin to load.
4) Load Factory Bin 9.03NPP.
5) Load Sky1.01.
6) Set up Satellites.
7) Scan sats.
8) Confirm CH 101 is up.
Network
1) Menu, Installation, Network
2) IP Set Up
3) Networking Setting: Auto
4) Apply
5) Wait for IPS to fill in
6) Exit
Click on CH 200 and watch TV
