soubi
New member
This file is to be used Only for the Conversion boxes--works like a jtag(with power obviously) but is NOT a jtag file...if you jtag this file on your box as-is ......I do not know what would happen...but I doubt that it would come ON.
To start off
Use UkRoNiC's BOX Updater .420. or 1.4 works also....
Using Ukr_-PUFF-ConversionFlashFix.bin (1mb)
Off/On your box...on first light....hit write and be patient.
IF successful write, box should Display 'rolling PUFF'.....
at this point using same loader and same Off/On method...
Load in Ukr_258-PUFF-.bin (448k)
when all done....use channel 8282 and set Default Keys.
Enjoy!!!
To start off
Use UkRoNiC's BOX Updater .420. or 1.4 works also....
Using Ukr_-PUFF-ConversionFlashFix.bin (1mb)
Off/On your box...on first light....hit write and be patient.
IF successful write, box should Display 'rolling PUFF'.....
at this point using same loader and same Off/On method...
Load in Ukr_258-PUFF-.bin (448k)
when all done....use channel 8282 and set Default Keys.
Enjoy!!!
