Beware Beware
PreferredByPete.com Enthusiast
Re: Help with limesat and dishpro
--------------------------------------------------------------------------------
Depends on what you have and what you want to do. To obtain DN you need 1 DP 500 (twin) which you implied you have, point to pick up 110 & 119. To obtain BEV you need a single or another twin on a separate dish pointed to 91. If you have a DP34 switch you run one of the DP500 leeds into Sat1 and another into Sat2. From the DP34 output you run one wire to an Ecoda 0/22KHz switch (relatively inexpensive) and attach it to the 0KHz side of the switch. Now you take the lead from the 91 sat and plug this into the 22KHz side of the Ecoda. Run the Ecoda output into your Limesat. If you don't have a DP35 it's slightly more complicated.
I am attaching a more detailed file I leached from another site. It goes into great detail.
--------------------------------------------------------------------------------
Depends on what you have and what you want to do. To obtain DN you need 1 DP 500 (twin) which you implied you have, point to pick up 110 & 119. To obtain BEV you need a single or another twin on a separate dish pointed to 91. If you have a DP34 switch you run one of the DP500 leeds into Sat1 and another into Sat2. From the DP34 output you run one wire to an Ecoda 0/22KHz switch (relatively inexpensive) and attach it to the 0KHz side of the switch. Now you take the lead from the 91 sat and plug this into the 22KHz side of the Ecoda. Run the Ecoda output into your Limesat. If you don't have a DP35 it's slightly more complicated.
I am attaching a more detailed file I leached from another site. It goes into great detail.
