[Info!] Programing a remote

[lecram]

Does anybody know how to program my trio remote to work with my samsung tv, I searched and can't find anything
thank you much for the help past and future

 

[CASPER]

How To Program Remote To Control Your TV

Your CNX Mini Receiver comes with a Users Guide. In the Users Guide, find your brand of TV. You will see a list of 3 digit codes for your brand of TV in the back of the Users Guide.

3 Digits Setting Method

1. Turn on TV
2. Press the "TV" Key and "OK" at the same time for more than
2 seconds. Then , the TV LED will turn On/Off 2 times.
3. Refer to the TV Brand List and press the 3 numbers, if it is
the right 3 numbers the TV LED will turn on/off 2 times. If it is
the wrong 3 numbers the TV LED will turn on/off 1 time.
4. If there are more than 1 set of 3 digit code numbers , repeat
step 3 until the TV turns off.
5. If the TV turns off , press "OK" key. If the setting is done
properly , the LED of the RCU will turn on/off 2 times.

Auto Search Method

1. Turn on the TV
2. Press the "TV" Key and "OK" at the same time , for more than
2 seconds. Then the TV LED will turn on/off 2 times.
3. Press the "UP" KEY until the TV turns off.
4. If the TV turns off , press the "OK" Key. If the setting is done
properly , the LED on the RCU will turn on/off 2 times.

 

[lecram]

thank you very much casper it worked like a charm

 

[CASPER]

thank you very much casper it worked like a charm

your welcome lecram now I will close this thread

think about upgrading to vip membership status we have great download there...https://preferredbypete.com/community/account/upgrades