CASPER
New member
ok guys here is your bin to control 'slingbox' use these instructions to add
to your sling box if you have older 'slingbox' add in the sbav.cfg newer versions require only these steps (I tested on the slingbox pro)
Here's the instructions again for using the .bin file with the latest incarnation of SlingPlayer...
1) Make sure you're running the latest SlingPlayer 1.4.0.206
2) Copy the .bin file into the SBAV folder in the SlingPlayer program directory
3) Fire up SlingPlayer
4) Choose from Menubar -> SlingBox -> SlingBox Directory
5) Hit -> Edit properties
6) Choose SlingBox configuration tab
7) Hot audio/Video setup to run the wizard
8) Click -> Next -until you get to Device brand
9) Choose -> Other -> Next
10) Type in the alternative code from the .bin filename, ie, S1000 (bin name is S1000_PL.bin)
11) Then run the power and channel tests it takes you through, hit Finish and close the menu windows
to your sling box if you have older 'slingbox' add in the sbav.cfg newer versions require only these steps (I tested on the slingbox pro)
Here's the instructions again for using the .bin file with the latest incarnation of SlingPlayer...
1) Make sure you're running the latest SlingPlayer 1.4.0.206
2) Copy the .bin file into the SBAV folder in the SlingPlayer program directory
3) Fire up SlingPlayer
4) Choose from Menubar -> SlingBox -> SlingBox Directory
5) Hit -> Edit properties
6) Choose SlingBox configuration tab
7) Hot audio/Video setup to run the wizard
8) Click -> Next -until you get to Device brand
9) Choose -> Other -> Next
10) Type in the alternative code from the .bin filename, ie, S1000 (bin name is S1000_PL.bin)
11) Then run the power and channel tests it takes you through, hit Finish and close the menu windows
