CASPER
New member
How to Properly Load a KBox K1 Hero with a USB Flash Drive
NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !
1) Download and unzip both the ( KBox V.1.19.00 Factory ) and KBox latest release
NOTE: ALL KBox K1 Hero bins and or Factory bins Must Not be in a Zip file or any other file when put onto your flash drive !
2) Put your flash drive in the USB port on your computer right click on both files and then
select (Send To) on the dropdown list. Select (removable Disk) and click on it. The files should now be on your KBox flash drive
3) With your receiver already turned on plug your KBox flash drive into the USB port on the front of your KBox K1 receiver.
4) The software Update screen will pop up on your TV. with your remote select the K1Hero_V.1.19.00 file then click the RED button above the number pad on your remote.
When it is finished loading your receiver will reboot and then go into standby mode.
Remove your USB Flash Drive
5) Click the Red button on the top of remote to turn receiver On, set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time ! Go to menu installation and go to Systems Recovery and factory reset.
6)When your receiver reboots into standby mode or shows ---- Click the Red button on the top of remote to turn receiver On. Once the receiver is on, put your USB Flash drive back in your receiver and Repeat the First 5 steps to load the Latest K1Hero bin!
5b) BUT this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan All the satellites your pointed at.
NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !
NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !
1) Download and unzip both the ( KBox V.1.19.00 Factory ) and KBox latest release
NOTE: ALL KBox K1 Hero bins and or Factory bins Must Not be in a Zip file or any other file when put onto your flash drive !
2) Put your flash drive in the USB port on your computer right click on both files and then
select (Send To) on the dropdown list. Select (removable Disk) and click on it. The files should now be on your KBox flash drive
3) With your receiver already turned on plug your KBox flash drive into the USB port on the front of your KBox K1 receiver.
4) The software Update screen will pop up on your TV. with your remote select the K1Hero_V.1.19.00 file then click the RED button above the number pad on your remote.
When it is finished loading your receiver will reboot and then go into standby mode.
Remove your USB Flash Drive
5) Click the Red button on the top of remote to turn receiver On, set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time ! Go to menu installation and go to Systems Recovery and factory reset.
6)When your receiver reboots into standby mode or shows ---- Click the Red button on the top of remote to turn receiver On. Once the receiver is on, put your USB Flash drive back in your receiver and Repeat the First 5 steps to load the Latest K1Hero bin!
5b) BUT this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan All the satellites your pointed at.
NOTE
ALWAYS Unplug your receiver BEFORE disconnecting Or Connecting your Coax cable Or RCA cables !! FAILURE to do so WILL damage your receiver !