CASPER
New member
RX600 Factory file & Directions
If you would like to download the factory skyview Rx600 bin on your unit. Please fallow these steps.
1) Go into menu and go to "Factory Default" press ok on "ALL" . Del all the channels off the box.
2) Connect the unit to power and to your computer with the Null cable (Don't turn the unit on yet from the back).
3) open the SKyview loader and open this factory 1.68 bin file in the loader.
4) press and hold the "Standby" button, and then turn the unit on from the back, dont let go of the "Standby" button yet.
5) As you are holding the standby button, you will seen "boot" on the front panel.
6) Now press start on the loader and your unit should take the factory file. After the file is loaded you will need to trun it off and on from the back. Now you unit is as it was, before programing.
If you would like to download the factory skyview Rx600 bin on your unit. Please fallow these steps.
1) Go into menu and go to "Factory Default" press ok on "ALL" . Del all the channels off the box.
2) Connect the unit to power and to your computer with the Null cable (Don't turn the unit on yet from the back).
3) open the SKyview loader and open this factory 1.68 bin file in the loader.
4) press and hold the "Standby" button, and then turn the unit on from the back, dont let go of the "Standby" button yet.
5) As you are holding the standby button, you will seen "boot" on the front panel.
6) Now press start on the loader and your unit should take the factory file. After the file is loaded you will need to trun it off and on from the back. Now you unit is as it was, before programing.