CASPER
New member
Pansat 2800 j tag
You will find the files in two folders: The one is the extracted files from the receiver while flashed with the latest bin (at this date, its the 416, June 2007).
The second folder contains the extracted files after a factory default and reload of the factory bin.
2800 Jkeys Display
Jtag Info:
Device ID 0x1D405041
Device STi5518MVB-X
IRD Model Pansat 3500
IRD# R -0 0644 22017-90
Box Keys 9B 05 21 71 6A 21 9F 20
Build Cfg 81
Boot Strap BOOT
Model ID LTC Software
2800 Jtag Instructions
With power off and top open on the Pansat,
Plug the jtag cable into the Pansat Jtag header.
Plug the other end into computer.
With the computer on turn on the power to the 2800.
Open Jkeys and it should auto-detect it as a 3500 in the IRD box,
but you DON'T have to change it.
Then Click on Flash Programming.
A box will pop up saying power down reciever then wait 3-4 seconds power back up then hit ok, well DON'T power down reciever just hit ok.
Then in the Chip/Sector Programming, Click on Erase, and erase whole flash.( 3 - 4 times)
Then Click on Program, and select the 2800 bin.
Wait for flash to complete. Then Close all programs remove Jtag and reboot your receiver.
You will see lights or b-80 on the front panel.
Load current bin via null modem cable.
You will find the files in two folders: The one is the extracted files from the receiver while flashed with the latest bin (at this date, its the 416, June 2007).
The second folder contains the extracted files after a factory default and reload of the factory bin.
2800 Jkeys Display
Jtag Info:
Device ID 0x1D405041
Device STi5518MVB-X
IRD Model Pansat 3500
IRD# R -0 0644 22017-90
Box Keys 9B 05 21 71 6A 21 9F 20
Build Cfg 81
Boot Strap BOOT
Model ID LTC Software
2800 Jtag Instructions
With power off and top open on the Pansat,
Plug the jtag cable into the Pansat Jtag header.
Plug the other end into computer.
With the computer on turn on the power to the 2800.
Open Jkeys and it should auto-detect it as a 3500 in the IRD box,
but you DON'T have to change it.
Then Click on Flash Programming.
A box will pop up saying power down reciever then wait 3-4 seconds power back up then hit ok, well DON'T power down reciever just hit ok.
Then in the Chip/Sector Programming, Click on Erase, and erase whole flash.( 3 - 4 times)
Then Click on Program, and select the 2800 bin.
Wait for flash to complete. Then Close all programs remove Jtag and reboot your receiver.
You will see lights or b-80 on the front panel.
Load current bin via null modem cable.