[Help!] CW-600S Driver Needed??

Good news and bad news. Good news is I have more channels now including history, comcast and disney. Bad news is i lost tennis and local channels. I've tried several different antenna settings but can't seem to get both locals and the other channels together. My present settings are: Sat119 - 12224; LNB 11250; Type Normal; 22khz auto; Diseqe LNB1; Legacy off. Sat110 - 12224; LNB 11250; Type Normal; 22khz auto; Disque LNB2; Legacy off. This gets me most channels but not locals. I've tried several factory default resets b4 rescanning but no help. I have CW600s Regular with two Dish 500 dishes pointed in two directions. Any help/advice very much appreciated.

Help. I checked my two dishes. I have one pointing to sat119 and sat110. This dish has two cables coming from lnbs. i'm pretty sure they are dual lnbs because the two cables go to two 21khz switches labeled "dish one". (I have two receivers at home.) The other dish is pointed to sat 61.5. It has one lnb with two cables running to the two 21khz switches labeled "dish" two. What would be the antenna settings in my captive works 600s regular for scanning the sats? I've tried many combinations but none seem to get all channels. After scanning I always miss some channels. If I can't get the right antenna setting combinations for my dishes, then I'm considering eliminating the dish pointed at 61.5 and just running the two cables from 199/110 dish directly to my two receivers however I would like to keep them all if possible. Can you help?