soubi
New member
If you don't do the same steps that I will explain below you will get the "Scrambled or Bad Channel Nag or Reciever will Freeze up.
After loading this bin and reciever reboots to ON then channel # it will appear that your channels are still there. Soon as you Power it OFF and hook it up to TV and Sat then Power reciever back ON your channel list will be gone but your Antenna Setup settings will remain so this is what you will need to do.
TV will display English when you turn receiver ON so push OK on remote.
Dish Setup (Ok).
Blindscan (OK).
Satellite , Echo7/ku (OK).
Scan, ALL (OK).
Wait until TP's and Channels are found then exit all the way out to Picture and Picture should come in. " Reboot Receiver ".
After receiver reboots back up to ON then Picture go back into Menu.
Dish Setup (Ok).
Blindscan (OK).
Satellite , Echo8,10/ku (OK).
Scan, ALL (OK).
Wait until TP's and Channels are found then exit all the way out to Picture and Picture should come in and receiver should be good to go from there.
If scanning another Sat then " Reboot Receiver" before doing a Blindscan on that Sat.
Jvvh-Team-PUFF_V202_(FULL JTAG)_Flash is for "JTAG ONLY"
"Original 2700 Bin Modified & Compressed by fwank7"
Using "Jvvh" name in bin as a sign of respect to the 2500 to 2700 conversion creator.
end c/p
You WILL lose your current channel list, favorites, and P-Locked channels!!!
After loading this bin and reciever reboots to ON then channel # it will appear that your channels are still there. Soon as you Power it OFF and hook it up to TV and Sat then Power reciever back ON your channel list will be gone but your Antenna Setup settings will remain so this is what you will need to do.
TV will display English when you turn receiver ON so push OK on remote.
Dish Setup (Ok).
Blindscan (OK).
Satellite , Echo7/ku (OK).
Scan, ALL (OK).
Wait until TP's and Channels are found then exit all the way out to Picture and Picture should come in. " Reboot Receiver ".
After receiver reboots back up to ON then Picture go back into Menu.
Dish Setup (Ok).
Blindscan (OK).
Satellite , Echo8,10/ku (OK).
Scan, ALL (OK).
Wait until TP's and Channels are found then exit all the way out to Picture and Picture should come in and receiver should be good to go from there.
If scanning another Sat then " Reboot Receiver" before doing a Blindscan on that Sat.
Jvvh-Team-PUFF_V202_(FULL JTAG)_Flash is for "JTAG ONLY"
"Original 2700 Bin Modified & Compressed by fwank7"
Using "Jvvh" name in bin as a sign of respect to the 2500 to 2700 conversion creator.
end c/p
You WILL lose your current channel list, favorites, and P-Locked channels!!!
