CASPER
New member
How to load the I-Link 9500HD w/ Loader and null modem cable.
1)Down load the I-Link 9500HD Loader SUpdateHD201 and unzip (extract) the file.
2)Open program Update Tool Ver 2.01
3) Set up you com port (usually Com 1)
4)File Type: Application
5)Browse for IS 9500 HD_FAC.IMG (make sure you down loaded this prior and un zipped)
6)Make sure null modem cable is connected between rs-232 serial port of the computer/laptop and the rs-232 serial port of the receiver.
7)Have the rear switch of the receiver OFF, hit SEND on the Loader.
8)Turn rear switch of the receiver to ON, let the program load and receiver reboot.
9) Now you can load programs to the receiver using the usb port.
1)Down load the I-Link 9500HD Loader SUpdateHD201 and unzip (extract) the file.
2)Open program Update Tool Ver 2.01
3) Set up you com port (usually Com 1)
4)File Type: Application
5)Browse for IS 9500 HD_FAC.IMG (make sure you down loaded this prior and un zipped)
6)Make sure null modem cable is connected between rs-232 serial port of the computer/laptop and the rs-232 serial port of the receiver.
7)Have the rear switch of the receiver OFF, hit SEND on the Loader.
8)Turn rear switch of the receiver to ON, let the program load and receiver reboot.
9) Now you can load programs to the receiver using the usb port.