CASPER
New member
How to Recover From The E-01 Error
To Recover from the dreaded E-01 ERROR simply follow the RS232 loading instructions But REPEAT step 4 and 5 twice before moving on to step 6
NOTE
Always unplug your receiver before disconnecting or connecting your coax cable or RCA cables!!!! Failure to do so will damage your receiver.
1) Download and unzip both the k-box factory file 1.19.00 and Hero latest bin release.
2) Connect your receiver to your computer using your RS232 cable.
3) Open your K1 Hero Loader click the file button and load your 1.19.00 into your loader
4) Timing is everything on this step. Put your mouse over the download button and as soon as you turn the rear power switch on your receiver ON click the download button
If your to slow it will not load and you must Repeat this step.
5) When your receiver reboots itself or you see this ---- turn off the rear switch and reconnect it to your TV then click Menu on your remote and then go to Installation screen and select Factory Reset and click YES to (System restore to Factory Default) when the factory reset is finished set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time !
6) Now Repeat the First 5 steps to load the Latest Hero release.
But this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan all the satellites your pointed at.
To Recover from the dreaded E-01 ERROR simply follow the RS232 loading instructions But REPEAT step 4 and 5 twice before moving on to step 6
NOTE
Always unplug your receiver before disconnecting or connecting your coax cable or RCA cables!!!! Failure to do so will damage your receiver.
1) Download and unzip both the k-box factory file 1.19.00 and Hero latest bin release.
2) Connect your receiver to your computer using your RS232 cable.
3) Open your K1 Hero Loader click the file button and load your 1.19.00 into your loader
4) Timing is everything on this step. Put your mouse over the download button and as soon as you turn the rear power switch on your receiver ON click the download button
If your to slow it will not load and you must Repeat this step.
5) When your receiver reboots itself or you see this ---- turn off the rear switch and reconnect it to your TV then click Menu on your remote and then go to Installation screen and select Factory Reset and click YES to (System restore to Factory Default) when the factory reset is finished set the Language of choice and then set your time zone. After setting the time zone the receiver will ask if you want to Auto detect your satellites and switch settings. Say NO at this time !
6) Now Repeat the First 5 steps to load the Latest Hero release.
But this time say YES to Auto Detect and it will auto set your LNB type and switch settings and then scan all the satellites your pointed at.
