CASPER
New member
How to scan your satellites on a cw700
1- Press the Menu button and go to Instllation
2- Enter the pin if required
3- Go to Antenna Setting
4- Select the satellite you want to scan and the settings for the satellite
5- On the bottom screen, there are four options: Auto, Network, Blind scan and Transponder scan. Select one of these option to scan it
Final Step before you enjoy your new receiver:
After it's done with all the scanning, press Exit out of the Menu. Now Press F1 000 on the remote control to enable patch. You should see message on TV that say PATCH ENABLED. Now just wait for the keys to roll and watch TV.
1- Press the Menu button and go to Instllation
2- Enter the pin if required
3- Go to Antenna Setting
4- Select the satellite you want to scan and the settings for the satellite
5- On the bottom screen, there are four options: Auto, Network, Blind scan and Transponder scan. Select one of these option to scan it
Final Step before you enjoy your new receiver:
After it's done with all the scanning, press Exit out of the Menu. Now Press F1 000 on the remote control to enable patch. You should see message on TV that say PATCH ENABLED. Now just wait for the keys to roll and watch TV.
