eloans1
New member
1. Open Sudate201 set you Com port
2. Connect Rs232 Null Cable to serial Com port and dongle
3. Make sure dongle is powered off
4. Opne the DD1100_1246_OCT1110_9115_P dongle file.
5. Press send on SUdate.exe tool and the plug the power to the dongle.
6. Once the dongle is programmed you can now disconnect it.
Receiver programming.
Load the T2NA_1313_SEP2410_P file on a USB and load it on the unit by
the USB port on the back of the unit.
Once the unit has been programmed you can now connect the dongle and the unit
together and turn the unit on.
Scan in your channels as you would any other unit and reset the unit and enjoy
tv.
View attachment SUpdate201 loader for Ilink.zip
2. Connect Rs232 Null Cable to serial Com port and dongle
3. Make sure dongle is powered off
4. Opne the DD1100_1246_OCT1110_9115_P dongle file.
5. Press send on SUdate.exe tool and the plug the power to the dongle.
6. Once the dongle is programmed you can now disconnect it.
Receiver programming.
Load the T2NA_1313_SEP2410_P file on a USB and load it on the unit by
the USB port on the back of the unit.
Once the unit has been programmed you can now connect the dongle and the unit
together and turn the unit on.
Scan in your channels as you would any other unit and reset the unit and enjoy
tv.
View attachment SUpdate201 loader for Ilink.zip