CASPER
New member
Very similar to the Nano2 just a few extra Sub-Menus
Thanks goes to my Buddy Tech07 for the Info
Nano Premium confirmed to be up and running
Big thanks to Universal Sats for making this Receiver Available for testing.
For everyone that decides to C/P this Guide or any others from any site, please have the common courtesy to give credit to the poster unless it states C/P...... it was posted by someone, and the original Poster should always be credited with the post. I am seeing to many being posted with no credit or taken as their own work and that is just wrong, in so many ways.
This Guide is the Original, by the way.
This Nano Premium uses the same process as the Nano2 for loading.
Loading Bins
1) Copy Extracted Bins Factory 9.03 and Patch Sky 1.01 onto the USB Stick.
2) Insert USB Stick into front USB Port.
3) Go to Menu, Utility, USB and chose bin to load.
4) Load Factory Bin 9.03NPP.
5) Load Sky1.01.
6) Set up Satellites.
7) Scan sats.
8) Confirm CH 101 is up.
Network
1) Menu, Installation, Network
2) IP Set Up
3) Networking Setting: Auto
4) Apply
5) Wait for IPS to fill in
6) Exit
Click on CH 200 and watch TV
Thanks goes to my Buddy Tech07 for the Info
Nano Premium confirmed to be up and running
Big thanks to Universal Sats for making this Receiver Available for testing.
For everyone that decides to C/P this Guide or any others from any site, please have the common courtesy to give credit to the poster unless it states C/P...... it was posted by someone, and the original Poster should always be credited with the post. I am seeing to many being posted with no credit or taken as their own work and that is just wrong, in so many ways.
This Guide is the Original, by the way.
This Nano Premium uses the same process as the Nano2 for loading.
Loading Bins
1) Copy Extracted Bins Factory 9.03 and Patch Sky 1.01 onto the USB Stick.
2) Insert USB Stick into front USB Port.
3) Go to Menu, Utility, USB and chose bin to load.
4) Load Factory Bin 9.03NPP.
5) Load Sky1.01.
6) Set up Satellites.
7) Scan sats.
8) Confirm CH 101 is up.
Network
1) Menu, Installation, Network
2) IP Set Up
3) Networking Setting: Auto
4) Apply
5) Wait for IPS to fill in
6) Exit
Click on CH 200 and watch TV
