[Problem!] Sonicview "Invalid Parameter's Value"

frankford

New member
Greetings all,

I've been trying to load the Ihub bin 2.1 and 2.2 version 4.19 with little success (Sonicview Premier). When I do a search with the WIZ100SR 3.0.2 an "Invalid Parameter's value" is displayed but I do get the correct version number in the upper left corner and I can upload a newer version (ie 2.1 to 2.2 with no problems).

What kind of parameters are we talking about?

Thanks for the help.

Frank
 
Try this....

Fixing the ihub v82 version bug

you got the version 82 bug...you need to fix that first then we can get it going

on the XP computer operating system
1-goto start>network connections>right click then choose properties
2-right click on local area connections and select properties,go to the tcp/ip line in the window and double left click
3-goto Alternate Configuration and change it to User configured,enter address 192.168.11.52,subnet 255.255.255.0 and gateway 192.168.11.1
4-now exit and reboot computer
5-with receiver in standby run wiznet and it should find the ihub
6-upload 1.9 then reboot receiver
7-goto receiver menu>installation>ipconfig
8-set to dhcp
9-enter serial number and hit apply
10-reboot receiver



Vista and Windows 7

For Vista and Windows 7 Operating System

1) Start > Control panel > Network and Sharing Center >
2) Under Tasks Pane - Manage Network Connections >
3) Right Click - Local Area Connection >
4) Properties > Highlight - Internet Protocol Version (IPv4)
5) Select Properties Button >
6) Click Alternate Configuration Tab > Select -
 
Back
Top