CASPER
New member
Instructions for Coolsat 6000
It is recommended that you highlight, copy and paste these instructions into a Word Document and print them out. You will need them when you take the reciever to your TV.
It is Recommended that you Write Down All D!sh Settings BEFORE Proceeding !!!!
*Before connecting or disconnecting the receiver to or from the TV/ PC, you must ensure the power switch is turned OFF the rear of the reciever!!!
Open a new folder and name it CoolSat 6000.
First you need to go to the files section in this Forum
Click on the blue links for active files and download to Coolsat 6000 folder
You will need Proloader 2.4 save to CoolSat 6000 folder
You will need bin 100) the original factory bin. Save to CoolSat 6000 folder
Then download newest bin and save to Coolsat folder.
Go to Coolsat 6000 folder and unzip files.
To unzip files , right click on file, hit extract all.
You will need to unzip the Factory binV.100 and the newest current Bin file and save in CoolSat 6000 Folder.
Note the proloader will require the unzipped stb file for it to work
You now have all the tools to load your receiver and are ready to
Continue;
Go to Menu/System settings and write down your settings for each Satellite, Go to Options and record those as well you will need them later.
Loading New File To Coolsat 6000
With the reciever connected to the TV>
Go to menu/system settings/Data base reset/enter 0000/Factory set/press OK/ select Yes/
* Power Off receiver using switch on back of unit & disconnect from TV
* Connect receiver to PC using supplied cable & and plug in AC power cord
* Turn receiver power switch back on.
* Open up Coolsat Pro Loader File
* Hit Auto Detect--Exit
Using browse option, locate and select **Coolsat 6000-100-20060308 stb.
* You will now see the file in the display box in the proloader, click "Connect"
**This will load the original factory program to the receiver. You will see new files loading to 100%, and then old files erasing and writing up to 100%.
* When complete, power off the receiver.
* Disconnect the receiver from PC
* Reconnect the receiver to your TV and turn power switch on.
* Using the remote, select System Setting in the main menu, in the
submenu select Database Reset, and then Factory Set, Press OK
* When factory set is complete (language option screen appears), power off receiver and disconnect from TV.
* Reconnect receiver to PC and switch power back on
* Open up Coolsat Pro Loader File
* Using browse option, locate and select from your folder the New NorW STB file.
* You will now see the file in the display box, click connect.
* eg. Coolsat 6000-162-STB Once again, you will see the new files loading to 100% and old files erasing to 100%.
* When complete, power off the Coolsat and disconnect from PC
* Reconnect to TV and switch power back on.
* Using the remote, select Menu --> System Setting --> Database Reset, enter passworld and select Factory Set, Press OK
After you click on save you will be back in Main Screen.
Select language you want
* Now, press Menu --> Installation --> D!sh Setting, click Ok, enter password and scroll to your first satellite.You will need to enter your settings (as you wrote them down) for each Satellite LNB type, DiSEqC to 1.0 and commit the correct ports of the DiSEqC switch if you are using one.Press Exit and save.
* Next go to Options, click OK . Reset options as you had written them down.Turn on renumber B3V,if necessary. Go to renumbering local ch, click OK and enter your locale. . Press exit and save.
* Go to Auto Scan; select (example) 91.0W Nimiq 1,3 as the satellite, and then select OK to run the scan. Repeat for each satellite. When done, press Exit and save.Exit to main menu.
* Back in main menu , go to System Setting.Set time settings and security-channel locks. Press exit and save.Once complete, exit from Main Menu.
* Exit until you return to full screen. The screen will say "Scramble Channel" until the keys roll and then your television program will appear.
Watch TV
Good Luck !!! CASPER....
It is recommended that you highlight, copy and paste these instructions into a Word Document and print them out. You will need them when you take the reciever to your TV.
It is Recommended that you Write Down All D!sh Settings BEFORE Proceeding !!!!
*Before connecting or disconnecting the receiver to or from the TV/ PC, you must ensure the power switch is turned OFF the rear of the reciever!!!
Open a new folder and name it CoolSat 6000.
First you need to go to the files section in this Forum
Click on the blue links for active files and download to Coolsat 6000 folder
You will need Proloader 2.4 save to CoolSat 6000 folder
You will need bin 100) the original factory bin. Save to CoolSat 6000 folder
Then download newest bin and save to Coolsat folder.
Go to Coolsat 6000 folder and unzip files.
To unzip files , right click on file, hit extract all.
You will need to unzip the Factory binV.100 and the newest current Bin file and save in CoolSat 6000 Folder.
Note the proloader will require the unzipped stb file for it to work
You now have all the tools to load your receiver and are ready to
Continue;
Go to Menu/System settings and write down your settings for each Satellite, Go to Options and record those as well you will need them later.
Loading New File To Coolsat 6000
With the reciever connected to the TV>
Go to menu/system settings/Data base reset/enter 0000/Factory set/press OK/ select Yes/
* Power Off receiver using switch on back of unit & disconnect from TV
* Connect receiver to PC using supplied cable & and plug in AC power cord
* Turn receiver power switch back on.
* Open up Coolsat Pro Loader File
* Hit Auto Detect--Exit
Using browse option, locate and select **Coolsat 6000-100-20060308 stb.
* You will now see the file in the display box in the proloader, click "Connect"
**This will load the original factory program to the receiver. You will see new files loading to 100%, and then old files erasing and writing up to 100%.
* When complete, power off the receiver.
* Disconnect the receiver from PC
* Reconnect the receiver to your TV and turn power switch on.
* Using the remote, select System Setting in the main menu, in the
submenu select Database Reset, and then Factory Set, Press OK
* When factory set is complete (language option screen appears), power off receiver and disconnect from TV.
* Reconnect receiver to PC and switch power back on
* Open up Coolsat Pro Loader File
* Using browse option, locate and select from your folder the New NorW STB file.
* You will now see the file in the display box, click connect.
* eg. Coolsat 6000-162-STB Once again, you will see the new files loading to 100% and old files erasing to 100%.
* When complete, power off the Coolsat and disconnect from PC
* Reconnect to TV and switch power back on.
* Using the remote, select Menu --> System Setting --> Database Reset, enter passworld and select Factory Set, Press OK
After you click on save you will be back in Main Screen.
Select language you want
* Now, press Menu --> Installation --> D!sh Setting, click Ok, enter password and scroll to your first satellite.You will need to enter your settings (as you wrote them down) for each Satellite LNB type, DiSEqC to 1.0 and commit the correct ports of the DiSEqC switch if you are using one.Press Exit and save.
* Next go to Options, click OK . Reset options as you had written them down.Turn on renumber B3V,if necessary. Go to renumbering local ch, click OK and enter your locale. . Press exit and save.
* Go to Auto Scan; select (example) 91.0W Nimiq 1,3 as the satellite, and then select OK to run the scan. Repeat for each satellite. When done, press Exit and save.Exit to main menu.
* Back in main menu , go to System Setting.Set time settings and security-channel locks. Press exit and save.Once complete, exit from Main Menu.
* Exit until you return to full screen. The screen will say "Scramble Channel" until the keys roll and then your television program will appear.
Watch TV
Good Luck !!! CASPER....