first, the only disadvantages:routing is more complex than a simple connection. without getting to technical, the router must temporarily store information about data transmission, since your computer isn't actually what's connected to the internet, it's the router. the router acts as a mediator between your computer and the internet, for lack of better words.doing the work it takes to do all this, there is a slight delay in time. so adding an additional router will multiply your latency by 2.also, if you use VPN to log into work from home, it would be very difficult to get this to work properly.you may have to reassign one of your router's LAN IP addresses. you may introduce some network connection conflicts if they were shipped with the same IP address.you will also want to turn off the DHCP server on one of the routers.i don't personally see a problem with what you're trying to do. technically, it should work. however, you may need some help from someone who knows networking to perform the above tasks. i work as a network engineer, and we generally connect network devices in this manner: router > switch > hub, however router > router any connection method will work with the necessary precautions and planning.I would recommend getting a switch and connecting the switch to the new wireless router. if the only reason is the additional ports, check out http://www.newegg.com/Product/Product.aspx?Item=N82E16833127083 (5-port gigabit network switch). this will eliminate a lot of frustration in configurations.