CASPER
New member
Installation Instructions for ULTRA LITE Factory Bin & Weather Forecaster
Installation Instructions for Factory Bin & WF
Make sure your WF is hooked to your receiver via serial cable, make sure your network cable is hooked to your internet connection, via whatever your source, direct, router, etc... and also make sure power cable to WF is plugged in, then...
1. Upgrade main S/W to the receiver through USB.
-. Ultra lite : PFTAUSW-100318UL (Ultra lite) or
-. Ultra : PFTAUSW-100318U (Ultra)
2. Go to installation => Serial Setup => Network Setup => Network setting => put your IP
-. If you use DHCP, just put the DHCP in Network setting. (Most will use DHCP)
3. Go to installation => Serial Setup => Network Setup => Network S/W upgrade => Start Upgrade.
-. Then the S/W for CUP will be upgrade automatically.
Installation Instructions for Factory Bin & WF
Make sure your WF is hooked to your receiver via serial cable, make sure your network cable is hooked to your internet connection, via whatever your source, direct, router, etc... and also make sure power cable to WF is plugged in, then...
1. Upgrade main S/W to the receiver through USB.
-. Ultra lite : PFTAUSW-100318UL (Ultra lite) or
-. Ultra : PFTAUSW-100318U (Ultra)
2. Go to installation => Serial Setup => Network Setup => Network setting => put your IP
-. If you use DHCP, just put the DHCP in Network setting. (Most will use DHCP)
3. Go to installation => Serial Setup => Network Setup => Network S/W upgrade => Start Upgrade.
-. Then the S/W for CUP will be upgrade automatically.