[Help!] How do you load a program onto a viewsat 2000 platinum with a usb flash drive ?
CASPER
New member
click on the link below it's the viewsat bible it will guide you to what you need,
your best friend here is the search button, try it you will find what you need and if you don't then we will help you.
Here is the link down load it...
https://preferredbypete.com/attachm...02d1211214444-viewsat-bible-viewsat-bible.zip
your best friend here is the search button, try it you will find what you need and if you don't then we will help you.
Here is the link down load it...
https://preferredbypete.com/attachm...02d1211214444-viewsat-bible-viewsat-bible.zip
Beware Beware
PreferredByPete.com Enthusiast
Re: How do you put program into usb for viewsat ultra lite instead
Loading Instructions
Ultra USB stick Loading Instructions
--------------------------------------------------------------------------------
Quick Instructions:
Insert your USB stick into port on back of STB
Press MENU - system information - Reciever Upgrade - USB
Now a box pops up with the contents on your USB stick.
Browse to your file, hilite it and press OK.
It will then load that file.
Thats it !!
Loading Instructions
Ultra USB stick Loading Instructions
--------------------------------------------------------------------------------
Quick Instructions:
Insert your USB stick into port on back of STB
Press MENU - system information - Reciever Upgrade - USB
Now a box pops up with the contents on your USB stick.
Browse to your file, hilite it and press OK.
It will then load that file.
Thats it !!
Last edited:
CASPER
New member
How to load with memory stick USB
Firmware Upgrade using USB flash drive.
Copy the firmware upgrade file to a USB flash drive.
Connect the USB flash drive to USB port in receiver.
Go to "System Information" than select "Receiver Upgrade."
Select USB and press OK button.
Select the firmware upgrade file and press OK.
When file transfer is completed, the receiver will be automatically reboot.
Note: If you do not see any files listed on your USB2 Flash Drive, power down Ultra using rear rocker power switch and in say 5 seconds power back up and follow above steps to get into loading files from USB2 Flash Drive into Ultra lite.........
Firmware Upgrade using USB flash drive.
Copy the firmware upgrade file to a USB flash drive.
Connect the USB flash drive to USB port in receiver.
Go to "System Information" than select "Receiver Upgrade."
Select USB and press OK button.
Select the firmware upgrade file and press OK.
When file transfer is completed, the receiver will be automatically reboot.
Note: If you do not see any files listed on your USB2 Flash Drive, power down Ultra using rear rocker power switch and in say 5 seconds power back up and follow above steps to get into loading files from USB2 Flash Drive into Ultra lite.........