WF Loading your BIN using USB Jump Drive

Loading your BIN using USB Jump Drive

• Now its time to download your BIN ( Newest autoroll bin
• Insert the Memory Stick in your PC and transfer the bin in. Then insert in your STB and in the Main Menu select System information and press OK
• Select Receiver Upgrade and press OK
• Go down to the bottom of the window, select USB and press OK
• A new window opens with some Korean files, years, etc.
• In the bottom of the window, it is your bin selects and presses OK
VERY IMPORTANT. DO NOT TURN THE POWER OFF
• Press Menu key
• Select Installation and press OK
• Select Antenna Setup and press OK
• Select your Sat.
• Here if you have a DISEqC switch enter the port #, Motor or Legacy SW
• No LNB Type need to select (from new, you have only two selection Standard and Universal). STB will select your LNB Automatic
• Press Exit and select Yes for saving the settings
• Your back to Antenna Setup screen
• Here you have Three choices:
1. Channel Scan
2. Auto Scan
3. Blind Scan
• Select Auto Scan
• Press OK
• You are in the Auto Scan window and you see the Bird(Sat.) you selected and on the top of your screen are three options:
1. Search option
2. Network search
3. Scan Start
• You don’t change nothing, go down and select Scan Start and press OK
• You do this for all the Birds (Sat.) you have
• Wait for Autoroll and watch TV

Click to expand...