fortec star

Hey Everybody This is my first post and wanted to say I've been browsing around this forum and it is great!. I was an avid tester awhile back until Charlie killed the waves. Now I finally cut the cable with commiecast and am dusting off my old fortec receiver and want to get some fta channels...

Hello all used to go on FTATALK before, great bunch of peeps over there and I used to come here to get my files. Anyways, I have been out of the FTA thing for a while and was wanting to know what if any of my rec's are still working and if not what would be the best to get (my GF is Japanese so...

wiz have been away for awhile. are the fortec & pansats down for good now, and if so, is there anything i can buy to get what i had with them ? thanks for all you do

Make Your Own PUFF Or B75 File All credit goes to Tronics ! Download and unzip the file. Double click on the GetDotNetFramework icon. Once downloaded just install. ( Takes a while so be patient ). Leave all the files in the TronicsBinModv1_5_GUI folder! Download the newest Pansat 2700 file...

Jvvh-Team-PUFF_Convert-Box_2700-To-2500 c/p Much like the Jvvh-Team-PUFF_Convert-Box_Lzma bin, this bin will convert any box that was already converted to 2700 (b75, PUFF or Lzma) back to 2500. You ONLY need to use the Loader you normally use and Hit Download on loader like you normally would...

ive been loding w/laptop for a while ,but recently purchased new laptop and now cant load via usb-serial cable as usb com ports on new laptop are 5 6 7 8 and the loaders only have pos 1234 provision , can someone help to either change laptop configuration or the loader configuration so it will...

Fortec Star Lifetime NA Manual Key -------------------------------------------------------------------------------- 1-click MENU on the remote 2-right arrow to Channel Manager 3-down arrow to CODE 4-enter 1001 5-right arrow until you NAGRAVISION into the top left corner 6-down arrow...

Is there a special way to flash the fortec star? can't seem to get the loader to connect. tks in advance

Amazonas Transponders(61W) And Receivers that have support BIN FILES A/R : 1. i-Link- 210 2. Brisat BS - 300a 3. Sonysat - DGR3000, DSR4000, DSR5000 4. SpaceStar - 500, 700 5. Ultrastar - made by DGStaTion IBM PPC 6. Linklite- 3000, 6000 7. Azbox- S700b, S700usb, ,S701b, S701usb,S710usb...

:) Can you test Telefonica with a regular DN 18" dish? If so, does it require special bins or do you input keys for this? Any direction would be greatly appreciated. Thanks.

I have dishpro single LNB in one dish (For Echo3) connected to Dual Dish Pro 2nd Disk (For 119 and 110) . Then there is a single cable coming out of 2nd dish and going to my Fortec (Converted to PUFF Pansat 2700). I am able to scan and watch Echo 7 and Echo 8,10K but not the 2nd dish. Please...

PUFF Recovery Bin (Noob Friendly Edition) Fortec/Pansat 2500 to 2700 FILES (PUFF) » PUFF Recovery Bin (Noob Friendly Edition) THE NOOB FRIENDLY SERIES: BY AMRINDER This is Amrinder's Noob Friendly PUFF Recovery bin guide.The files in this thread are C/P from "Ukronic" and "Musky's"...

PUFF Recovery Bin (Noob Friendly Edition) Fortec/Pansat 2500 to 2700 FILES (PUFF) » PUFF Recovery Bin (Noob Friendly Edition) THE NOOB FRIENDLY SERIES: BY AMRINDER This is Amrinder's Noob Friendly PUFF Recovery bin guide.The files in this thread are C/P from "Ukronic" and "Musky's"...

Fortec lifetime ultra PUFF_Boot_(BG's)_VER1.0.3_Lzma -------------------------------------------------------------------------------- C & P from igoreshka These are the same VER1.0.3_Boot files that was Originally posted to convert receiver to Lzma. Though "some people" seem to be makeing...

Convert FLU/2500 to PUFF 1.0.3 - It's Easy! -------------------------------------------------------------------------------- Hey, folks! I see a lot of people here asking me how to convert the following receivers to PUFF 1.0.3: Fortec STAR Lifetime Ultra, Pansat 2500A, and other Pansat 2500A...

fortec CloneSafe-B75-207-TiVo-femu for clones and originals not for converted 2500 to 2700

i loaded the 205 file and my receiver got stuck on the last F. im having trouble finding the boot 1.0.1 to load before trying the 205 file again. where can i find the 1.0.1?? thanks

i tryed to convert to puff and my Recver is stuck with the night rider lights what do i do next my Recv is lock up tighter than a drum it wont do anything ive tryed to flash it and it wont do anything so please Help :cry::cry:

1-102 Frecuencia Latina---------Peru 2-103 CMD ---------------------Peru 3-104 America Television--------Peru 4-105 Panamericana TV---------Peru 5-106 Plus TV------------------Peru 6-107 TNP----------------------Peru 7-108 Canal N------------------Peru 8-109 ATV----------------------Peru 9-111...

Converting vortex 7700 to PUFF Converting to PUFF Here is the new PUFF 253 bin for those who want to start converting to PUFF now. Also is the Loader and Boot60 zip. In that zip file is the 2700 to 2500 convertor loader by Chancysand as well as the boot60 bin file...