CASPER
New member
Fwank7_Jvvh-Team-PUFF_V201_F_EMU(2)
USE AT YOUR OWN RISK
If peeps want a no PUFF roll fix then this bin is ok but there is issues with 2700 bin as well so it's probably as good as it gets for now.
If you don't do the same steps that I will explain below you will get the "Scrambled or Bad Channel Nag or Reciever will Freeze up.
After loading this bin and reciever reboots to ON then channel # it will appear that your channels are still there. Soon as you Power it OFF and hook it up to TV and Sat then Power reciever back ON your channel list will be gone but your Antenna Setup settings will remain so this is what you will need to do.
TV will display English when you tuen reciever ON so push OK on remote.
Dish Setup (Ok).
Blindscan (OK).
Satellite , Echo7/ku (OK).
Scan, ALL (OK).
Wait until TP's and Channels are found then exit all the way out to Picture and Picture should come in. " Reboot Reciever ".
After reciever reboots back up to ON then Picture go back into Menu.
Dish Setup (Ok).
Blindscan (OK).
Satellite , Echo8,10/ku (OK).
Scan, ALL (OK).
Wait until TP's and Channels are found then exit all the way out to Picture and Picture should come in and reciever should be good to go from there.
If scanning another Sat then " Reboor Reciever" before doing a Blindscan on that Sat.
"Original 2700 Bin Modified"
Using "Jvvh" name in bin as a sign of respect to the 2500 to 2700 conversion creator.
You WILL lose your current channel list and favorites and P-Locks!!!
I followed the instructions as stated above and so far the bin works well...
It still does not work with Channel Master! I did not personally test whether
CM works with it but from all info gathered it will not!
USE AT YOUR OWN RISK
If peeps want a no PUFF roll fix then this bin is ok but there is issues with 2700 bin as well so it's probably as good as it gets for now.
If you don't do the same steps that I will explain below you will get the "Scrambled or Bad Channel Nag or Reciever will Freeze up.
After loading this bin and reciever reboots to ON then channel # it will appear that your channels are still there. Soon as you Power it OFF and hook it up to TV and Sat then Power reciever back ON your channel list will be gone but your Antenna Setup settings will remain so this is what you will need to do.
TV will display English when you tuen reciever ON so push OK on remote.
Dish Setup (Ok).
Blindscan (OK).
Satellite , Echo7/ku (OK).
Scan, ALL (OK).
Wait until TP's and Channels are found then exit all the way out to Picture and Picture should come in. " Reboot Reciever ".
After reciever reboots back up to ON then Picture go back into Menu.
Dish Setup (Ok).
Blindscan (OK).
Satellite , Echo8,10/ku (OK).
Scan, ALL (OK).
Wait until TP's and Channels are found then exit all the way out to Picture and Picture should come in and reciever should be good to go from there.
If scanning another Sat then " Reboor Reciever" before doing a Blindscan on that Sat.
"Original 2700 Bin Modified"
Using "Jvvh" name in bin as a sign of respect to the 2500 to 2700 conversion creator.
You WILL lose your current channel list and favorites and P-Locks!!!
I followed the instructions as stated above and so far the bin works well...
It still does not work with Channel Master! I did not personally test whether
CM works with it but from all info gathered it will not!
