BROWNNOSE
BOOTLICKER
Is it possible?
So of course I've got a clone and the damn thing won't take an image. so I messed this particular box up and now it doesn't dreamup either. It says that the device is not a dreambox and fails.
No ftp, no telenet, only ping on the network. I don't know any way into the box except a jtag.
so I break out my jtag that I use on linksys routers and voila, I only need to add pin 11 to the lpt with a 100ohm. So I wire it all up inside the dreambox and here's what happens.
I power it up, and the green light is on.
I can ping it.
I run the jtag utility and get the following:
Code:
>jtagdm500 -m dm500 -i
Register test failed. Check cable connection.At this point, the green light turns off, but the network lights are still on.
No more ping.
Power cycle and I'm back to square one with no luck.
If I plug it into a TV, miraculously enough I have enigma running. It has this wierd skin, almost like it is the basic 8bit but not. I can move around the menu and such and it seems like enigma is ok like the last image that failed at least put SOMETHING on it.
Umm.. it also has the channel list from the image I was trying to put on it.
ANY IDEAS? I'm ready for anything with this piece.
So of course I've got a clone and the damn thing won't take an image. so I messed this particular box up and now it doesn't dreamup either. It says that the device is not a dreambox and fails.
No ftp, no telenet, only ping on the network. I don't know any way into the box except a jtag.
so I break out my jtag that I use on linksys routers and voila, I only need to add pin 11 to the lpt with a 100ohm. So I wire it all up inside the dreambox and here's what happens.
I power it up, and the green light is on.
I can ping it.
I run the jtag utility and get the following:
Code:
>jtagdm500 -m dm500 -i
Register test failed. Check cable connection.At this point, the green light turns off, but the network lights are still on.
No more ping.
Power cycle and I'm back to square one with no luck.
If I plug it into a TV, miraculously enough I have enigma running. It has this wierd skin, almost like it is the basic 8bit but not. I can move around the menu and such and it seems like enigma is ok like the last image that failed at least put SOMETHING on it.
Umm.. it also has the channel list from the image I was trying to put on it.
ANY IDEAS? I'm ready for anything with this piece.