Limesat - If your Receiver is boot blinking, try this.

[CASPER]

Limesat - If your Receiver is boot blinking, try this.




here is what you do its abug that gets hung trying to understand what switch you have thats all... power off disconnect the coax from the back hold down the power button on the front power on the unit the boot will freeze on the screen this is normal.. power it back off leave the coax disconnected power it back on it will boot right now.. and then power off one more time hook up the coax and power back on now your fixed

PS when you power it on make sure your pushing the power button many times this resets the unit i could tell you why this happens but its will take a whole page to lets just say that the dsicq commands are to be Zero and when the Limesat powers up its trys One bit and that hangs the boot and causes error..