[Help!] Night rider lights

[Wing-Nutzz]

i tryed to convert to puff and my Recver is stuck with the night rider lights what do i do next my Recv is lock up tighter than a drum it wont do anything ive tryed to flash it and it wont do anything so please Help

 

[Beware Beware]

i tryed to convert to puff and my Recver is stuck with the night rider lights what do i do next my Recv is lock up tighter than a drum it wont do anything ive tryed to flash it and it wont do anything so please Help

Just try to load current file when first light flashes it will take a few tries but you'll get it shut it off on back when you turn it on hit the start on loader on first light try try try you get it Cheers

 

[Wing-Nutzz]

witch loader is the best to fix it could i have used the wrong loader

 

[Beware Beware]

I don't think the loader has any thing to do with your problem .. use one you usually use ....you didn't state which pansat you had .... but you did read all instructions on conversion .....

 

[Wing-Nutzz]

my GTRom loader dont work i used a fortec STB 1.4.0.0 loader and also i get a e2 error after it dl and it ask me to try again it a pansat 2700

 

[Beware Beware]

so it does download but then gets error or it won't let you download at all ..

 

[Beware Beware]

check to see if using right comport..

 

[Wing-Nutzz]

it will load the bin to 100 % then the error message comes up (write failed ER2 im very lost on this one

thx for all your help i hope i can fig it out

 

[Beware Beware]

well it looks like the loaders working .. are you loading pansat file or new puff file try the other & hard reboot...