Please help!!!

[dxfta2008]

There is a plroblem in my Viewsat vs2000 Ultra. When I turn on the power the receiver repeat booting and cannot start. I down load VS2000 Ultra factory bin file -V0132 from viewsat website and use loader1 to install to the stb. It doesn't work. The receiver works fine before and got this problem several days ago.
Thanks for help.

 

[CASPER]

sorry to say but your receiver might be fryed.......


there is two things you can try.......
follow the instructions the way I wrote them down if possible print this out.....

at the same time you turn the power on from the front then quickly turn it off from the back.....wait for 3 minutes then turn back from back do not touch the front power...this should power on by itself..after 1 or 2 minuets....then you do the following

First right down your sats settings.....do factory default this should clear up all the garbage if you had not done this before...reload the factory bin then the latest bin, re-scan your Sats, let the keyz roll leave in channel 200 if possible and enjoy your receiver & tv again.



I usually do factory Default every 2 months this keeps the receiver clean of old bin's or files...




Best of Luck on your Quest !!! Bless are doe's that get if for freeeeee....



P.S. NEXT TIME POST IN THE GENERAL FTA DISCUSSION

 

[Batman]

i'm pretty sure u have to use loader 2.1. go find it in the loader file!

 

[CASPER]

this is the location that you can find it...

https://preferredbypete.com/attachments/loaders/158d1181271858-viewsat-loader-2-1-new-loader.zip


ALSO AFTER YOU TRIED WHAT I'VE TOLD YOU ABOUVE THEN IF THAT DON'T WORK GO TO THE VS ULTRA FILES THERE IS A POST THERE CALLED


VS Ultra FAIL FIX.zip

Also here is a suggestion that may just work. I would start with the fail fix file, then load the latest factory file, and finally the latest update.

AND TRY THAT.....

 

[dxfta2008]

Casper7,
Thank you very much for your help. But I followed what you said above, it doesn't work. Now I am going to download VS Ultra fail fix.
Appreciate you spent time answer my quest.

 

[CASPER]

well I hope that works !!!!!!!