I am having trouble loading the Svlan_43 files from Wiznet. I am using wiznet 3.0.1. I have already loaded the svlan usb wiznet file in the stb and bin 514. When I try to load the 43 file, wiznet keeps saying unable to upload. What is going on. HD8000hd stb.
C/P from gformica
I decided to write this because of the many requests I was getting.
REQUIRED:
1. Wiznet (software)
2. svlan_usb_wiznet (file)
3. svlan_43 (file)
5. svlan HD9 (bin)
NOTES:
*Before beginning this conversion, update the receiver with BIN 515.
*Note the directory on your computer you place the svlan_43 file. You will have to find it later in the process.
* (STEP 5C) In some cases wiznet will show a "failure to update" mesage during the update with the svlan_43 file. IF you are unable to use wiznet to load the svlan_43 file, you may try loading it via the USB key like you would during a BIN update.
STEP BY STEP:
1. Install wiznet on to your PC
2. Save the svlan_usb_wiznet to your USB key
3. Upload the svlan_usb_wiznet to the receiver like you would any other bin
4. Reboot with rear main switch
5. Open wiznet and "click" the following keys:
a.SEARCH : this should find the IHUB and show you the version number
b.SETTING
c. UPLOAD: this will open your computer directory. At this point find the svlan_43 file on your computer and upload it to the IHUB.
6. Reboot with rear main switch
7. Upload svlan HD9 BIN to the receiver as you would any other BIN .
8. Reboot receiver with rear main switch
9. Check to see if the process was complete by opening wiznet and checking the version. It should now read 4.8
Your IHUB is now a LAN.
At this point you can use the new LAN on any private server or you can buy a serial number form Ebay and access the new Sonicview public server.
Hope this helps
Good Luck and L.L.IKS
***I made several edits to the post.
1. Should have the receiver on version 515 BIN before process.
2. Should reboot the receiver after step 7.
----------------------------------------------------------------------------------------------------------------------
I tried the above and it did NOT work for me.
Others are posting they have had success.
If you decide to try the procedure please post back your results.
