CASPER
New member
If you DO NOT load a channels list.
Just go in and change all your ports to none, connect all of your sats one at a time---Make sure receiver is off when you do the connects and disconnects.
Turn LNB Power to OFF except on Sat you are scanning
Scan each of the sats using regular scan and LNB set to standard with cable straight through to LNB.
Once you have scanned all the sats this way then turn off your receiver from back, hook up your diseqc switch again, go in and change your setup to reflect which ports you have the various sats hooked up to.
Turn LNB Power back to ON for all the sats you have scanned.
Doing it this way guarantees you will scan all the channels.
Sometimes diseqc switch screws up sat scan and you do not get All the channels.
Make sure you use Sort by SID, this will get you all the channels in the same order as providers.
Then tune in a channel like CNN and load your Guide.
Thats it, done deal and you will have all the channels.
Just go in and change all your ports to none, connect all of your sats one at a time---Make sure receiver is off when you do the connects and disconnects.
Turn LNB Power to OFF except on Sat you are scanning
Scan each of the sats using regular scan and LNB set to standard with cable straight through to LNB.
Once you have scanned all the sats this way then turn off your receiver from back, hook up your diseqc switch again, go in and change your setup to reflect which ports you have the various sats hooked up to.
Turn LNB Power back to ON for all the sats you have scanned.
Doing it this way guarantees you will scan all the channels.
Sometimes diseqc switch screws up sat scan and you do not get All the channels.
Make sure you use Sort by SID, this will get you all the channels in the same order as providers.
Then tune in a channel like CNN and load your Guide.
Thats it, done deal and you will have all the channels.
