[Help!] Channels not displayed

[kutyasa]

I have a bug that I could not fix and could not find any hints in the forums. I'm using a Viewsat Xtreme after having it reset with the latest factory BIN and have applied the latest BIN available. Scanned both 110 and 119 from scratch and setup sats and channels.

All channels are working OK, except: 105 - USA Network East, 147 - ESPN and a bunch of others (approx. 12). The signal quality is fine (above 75%) and the same as the other channels that are working, but these channels (and only these) keep autorolling endlessly.

For these, I have also checked with Channel Master the configs, comparing SID, TPD #, hfreq, vfreq, etc, etc., with the LyngSat database -- all settings are fine.

Can't think of anything else; does anybody have any idea on how to solve this?

Thanks,

 

[CASPER]

Do factory reset , make sure you select all , do re-scan sat and your channel should come back....

 

[kutyasa]

This is what I have done previously; just to be on the safe side, I performed factory reset again, select all , re-scan sat and the USA Network came back, but not the others.

Any other ideas?

 

[CASPER]

when you rescan did you select all to factory or only channel's

 

[kutyasa]

ok, done. thank you very much.

 

[CASPER]

ok you got it i see.