CASPER
New member
coolsat 4,5,6000 turns on and off
Follow every step of these instructions and you should be fine ! If you run a channel list dont load it do a auto scan.Sometimes channel lists cause problems.
How to Properly Load NorW Bins !
1. Write down your dish Settings (You will need them for step 7)
2. First do a Factory Set !! [Menu-System Settings-Database Reset-Factory Set]
3. Load Factory Flash !
4. Factory Set
5. Load the 143 bin (Note use the latest bin here)
6. Do another Factory Set !
7. Setup your dish settings
8. Setup your options [Renumbering Local Channels is a new option]
9. Auto Scan sats. (turning off network search will speed up 110 scan)
10. Set Time Settings and Channel Locks, Exit and Watch TV
**NOTE** Remember to always turn your coolsat off by the switch on the back of the unit before you disconnect or connect the coax cable or you may damage the stb.
Follow every step of these instructions and you should be fine ! If you run a channel list dont load it do a auto scan.Sometimes channel lists cause problems.
How to Properly Load NorW Bins !
1. Write down your dish Settings (You will need them for step 7)
2. First do a Factory Set !! [Menu-System Settings-Database Reset-Factory Set]
3. Load Factory Flash !
4. Factory Set
5. Load the 143 bin (Note use the latest bin here)
6. Do another Factory Set !
7. Setup your dish settings
8. Setup your options [Renumbering Local Channels is a new option]
9. Auto Scan sats. (turning off network search will speed up 110 scan)
10. Set Time Settings and Channel Locks, Exit and Watch TV
**NOTE** Remember to always turn your coolsat off by the switch on the back of the unit before you disconnect or connect the coax cable or you may damage the stb.
