[New Fix] HD8000_V0400_signallost_test080608.zip

[CASPER]

HD8000_V0400_signallost_test080608.zip

Thanks goes to my friend and colleague Slayer


Here is the HD8000_V0400 signal lost test file 08-06-08, for SONICVIEW SV-HD8000.
We've tried all possible replication, and could not produce a signal lost issue. From reading all the feedback, all donot experience signal on V0295. This test file made from V0295, just replace the latest patch. Please test it out and give a complete feedback, and we will work from there. Thank you for your being patience, and help out the testing.




*** Signal lost issue test file

Please do the following:

* Factory Default
* Load Factory File
* Load HD8000_V0400 signal lost test file
* Setup and fresh scan

Feedback the following:

* Using V1(without build-in fan, or V2(with built-in fan) ?
* Using S&Q or A-1
* LNB Type
* Switch Type
* Any other modification ?
* Please give detail when/how signal lost occur.

Do Not update this Test File, unless you're experiencing signal lost.

Note:
- Alway use Remove Device Safely function in USB Menu before remove USB drive (thumb drive/USB HDD)
- Alway format USB thumb drive before any update
- Do not extract file direct on to the UBS thumb drive, extract to a folder then copy to USB thumb drive.
- Do a hard reboot (power OFF-ON using rear switch) after every update.