[Help!] Help with v201 Fix

[moenshine]

Hello. I have read that this is a fix for using v201

1.- set factory settings
2.- loaded 124 factory bin
3.- loaded 201EMU bin
4.-blind scan 110 and 119

Can anyone provide me with the 124 factory bin as i cannot seem to find it on this site.

Thanks

Darren

 

[hobo2]

go to pansatusa.com load the software the

 

[CASPER]

https://preferredbypete.com/2700-files/9098-clonesafe-b75-v201-tivo-femu.html

 

[moenshine]

Thanks for the help. But after following the instructions all I still get is an alternating black screen to a black screen with the channel info. I may have to wait for a new Bin

 

[sbanditz]

Sometimes you have to apply the fix more than once, as it happen to me on a 2700A box. Also, it takes quite a while to do a blind scan of your satellites before you see any picture on your SAT. Once in a while I get a black screen, but only for a few seconds. This is a pretty solid fix, currently been up for a few days now Thanks again to Casper7 instructions

 

[moenshine]

Thanks I will try the procedure again.

Can i bug you for a couple of more answers.

I did a blind scan for 110 for 24 hours and it still only showed 12%. I had only 27 TV channels and 1 radio channel. Can you tell me why it stopped at this point?

Also I have the 2700 B-75 should I be using the 201 clone safe file? What does clone safe mean?

While on the subject what is the TiVo file for?

Thanks again for any help

 

[CASPER]

what bird are you aming at and what are your sat settings....


have you read this link before...
https://preferredbypete.com/general-fta-discussions/6293-tips-when-asking-help.html

 

[moenshine]

Well it worked great the third try. Blind scanned real quick. Still curious what clone safe and TiVo files are for.

Thanks everyone for the help