CASPER
New member
Hot Keys for the IPro 2000
F1 since info bar of ipro2k only displays epg/time data and omits satelite signal info etc... f1 is used for troubleshooting. If for somereasons your not getting picture you can click f1 to see weather you have signal/quality
F2 reserved for future use
F3
1.enable/disable autoroll.
2. Input keys manualy. The way the ipro2k works it only want you to input the CURRENT ACTIVE KEY. Also if you want to enter key for a specific provider you have to tune to a channel of that provider than click f3 and input the key
3. Ts Delay is used for IKS buffering. To eliminated freezing which was a big problem with ipro1k we have implemented a new feature TS delay. What this does is record the raw stream up to 10 seconds than wait for CW from IKS server to arrive to display the image. For example if your experiancing freezing while on IKS than try to raise the TS daly to 1 or 2 if your still having freezing issues rais it all the way up to 10. in our field tests most users on good connections should leave this on 0 and in worse cases a setting of 2 or 3 is sufficient
4. Box key this is used if you were going to use a card which is married to ird. In this field you can input the IRD serial number and ipro2k can handle that card. For example if you have SKY mexico card and would like to use it on ipro2k than you have to input the IRD key in this field which that card is married to
F4 Brings up IKS related fields.
1 Server field is reserved for future use
2 Serial key (in case you didnt input the serial key during auto setup you can input it in here) without the proper serial key IKS will not function
3. Status Displays the status of connection to IKS server
4. Key: display the current CW or Key of the SID received from IKS server
F1 since info bar of ipro2k only displays epg/time data and omits satelite signal info etc... f1 is used for troubleshooting. If for somereasons your not getting picture you can click f1 to see weather you have signal/quality
F2 reserved for future use
F3
1.enable/disable autoroll.
2. Input keys manualy. The way the ipro2k works it only want you to input the CURRENT ACTIVE KEY. Also if you want to enter key for a specific provider you have to tune to a channel of that provider than click f3 and input the key
3. Ts Delay is used for IKS buffering. To eliminated freezing which was a big problem with ipro1k we have implemented a new feature TS delay. What this does is record the raw stream up to 10 seconds than wait for CW from IKS server to arrive to display the image. For example if your experiancing freezing while on IKS than try to raise the TS daly to 1 or 2 if your still having freezing issues rais it all the way up to 10. in our field tests most users on good connections should leave this on 0 and in worse cases a setting of 2 or 3 is sufficient
4. Box key this is used if you were going to use a card which is married to ird. In this field you can input the IRD serial number and ipro2k can handle that card. For example if you have SKY mexico card and would like to use it on ipro2k than you have to input the IRD key in this field which that card is married to
F4 Brings up IKS related fields.
1 Server field is reserved for future use
2 Serial key (in case you didnt input the serial key during auto setup you can input it in here) without the proper serial key IKS will not function
3. Status Displays the status of connection to IKS server
4. Key: display the current CW or Key of the SID received from IKS server
