Nfusion Solaris and B3v Setup

[lmcarlos]

I need a little help. I have read all the info on webloader etc. My question is: currently Nimq1,3(91) and Nimq 2(82) is not loaded in the satellites listed on the solaris. There is Galaxy at 91 but it is not what I need. When I use the webloader will it load these satellites when the box is set to 50 for B3v.

I am a little confusted as it is so different from my viewsat. My setting there are

91 for example
LNB Power: On(can find this)
LNB Type: Universal (ok)
LNB High: 11250
LNB Low: 9750
TP Freq; 12224
Diseq 1 Port 2
Motor: off
Legacy SW SW 42 Dish 1

Some of this I can find in the installation menu but I only see one option for LNB and for Diseq it does not allow me to select ports.

I just want to be clear before I set it all up.

 

[CASPER]

next time use the search key ....but everything you need should be in the other's receivers forums click on the link below it will take you there....


https://preferredbypete.com/other-receivers-files/11380-nova-solaris-sd-simple-how.html

 

[lmcarlos]

I did use the search key and I did read the link you sent me to. In fact I read it 3 times, I also read the manual, and the Nfusion step by step for newbies twice. It does not specify the fact that 91 and 82 satellites are missing from the satellite list on the receiver.

My question is, will the files load the 91 and 82 satellites. I am not new to FTA I have 2 viewsats and am well versed on the forums and the industry however Nfusion is a little different. A yes or no would be most helpful.

 

[CASPER]

No the files do not load satelites......

 

[coyote360]

hi I have a viewsat pro ...so i can see there will be a wild before n3 for bev ..work

but does the nfusion work with bev right now ....???

thx

 

[CASPER]

yes nfusion on Iks is working for bev ...............

 

[coyote360]

thx for quick answer

 

[CASPER]

were have you been for the last two day's ....lol