[Confused!] NHL Channels

[donwoo]

Hello,

I had all the NHL Centre Ice Channels. I deleted all the channels and did a rescan but now I only have a couple of the NHL channels.

What do I need to do???

Much appreciated!

 

[archange187]

Hello,

I had all the NHL Centre Ice Channels. I deleted all the channels and did a rescan but now I only have a couple of the NHL channels.

What do I need to do???

Much appreciated!

What you can try is downloading a channel list, and get it back there. There is always the option of re-scanning. I have noticed sometimes when a viewsat does an auto scan it does not always pick up all the channels.

-Angel

 

[donwoo]

Thank you, I tried looking for a 110, 119 & 91 channel list for a VS extreme but can't find one. I checked the channel list file. Do you know where I can find one?

Thanks again

 

[archange187]

Thank you, I tried looking for a 110, 119 & 91 channel list for a VS extreme but can't find one. I checked the channel list file. Do you know where I can find one?

Thanks again

I'de be happy to give you mine, but i only run 91 on it. I'll post it later on tonight for you.

-Angel

 

[archange187]

After looking at my channel list on my extreme i don't have the nhl channels either so that list would not help yah. Since i don't watch hockey i never even noticed them missing.

-Angel

 

[donwoo]

I am trying to add the channels manually........... I have the VPID & APID but don't have the PCRID. Does anyone know where I can find this.

Please help.

Thanks.

 

[CASPER]

Tips to remember when asking for help in the forums:


When asking a question,you should follow these minimum requirements

1.What Satellites you are aiming at.
2.Your Receiver Brand/Model
3.What version of software you have loaded on it,
("the latest version" is NOT an acceptable answer)
4.What dish and lnb type you have.
("a plain lnb" is not a proper answer)
5.Any switches you have inline. (name the brand/type)
6.What settings you currently have setup.
7.What you have tried so far(Detailed steps)
8.Other things pertinent to your specific question
may also be needed and included.


To post a reply you must follow these guidelines

1. Your answer must be pertinent to the originators question.
(do not answer a question posted by someone else in this thread,(dont reply to hijacker)
2.No bashing the member or question. (we were all newbies at one time)
3.Do not reply to a hijackers question.
4.Post no files in discussion area.You may post a link to a file you
upload in the proper files section.


A properly stated question would look something like this.

I am running a Viewsat Extreme with version 070522x software loaded.
I have a dish500 with a twin Dp lnb.
I have 119 set on diseqc port1 with LNB selected as OCS-DP
and 110 on port2 again OCS-DP selected.
no other switches inline.
My question is,why cant I get 91 when i select it from the list?

Following this template will greatly increase the chances of a solution!



Maybe this is what your looking for click the link below.....


https://preferredbypete.com/attachm...-ultra-fix_for_missing_channels__vs_ultra.rar

 

[archange187]

I am trying to add the channels manually........... I have the VPID & APID but don't have the PCRID. Does anyone know where I can find this.

Please help.

Thanks.

You can check out LyngSat - Lyngemark Satellite if you have not already. They update there info and i find most of it useable.

-Angel