Pansat 2700a jtag kit with how to's

[Rumas]

Warning: Only use these file if you know what your doing. We are not responsible if you screw your receiver up.

Here's a jtag kit of how to make a jtag cable with pictures, the software to jtag with & a "HOW TO" use the software with screenshots!!

If you are making your own cable and you have a ten pin header, substitute the following schematic to the 20 pin in the how to:

pansat 10 pin layout:
2 4 6 8 10
1 3 5 7 9
hs1

10 pin cable schematic:
DB25 pin2------100 ohm resistor ---> Pin 4
DB25 pin3------100 ohm resistor ---> Pin 3
DB25 pin4------100 ohm resistor ---> Pin 1
DB25 pin5------100 ohm resistor --> Pin 8
DB25 pin13----100 ohm resistor----> Pin 6
DB25 pin18 to 25----------->GND Pin 9