gopalmm2
New member
C/P: Credit goes to Pivot.
If you have converted your NFusion Solaris or Phoenix to the NFPS system and you find it is not working, then to reconvert to Original NFusion system do the following:
1. Load the boot_g3x_to r3x_v1.23.bin from the NFPS File in BOOT mode.
2. Load this file u48 factory file from July 2009 also in BOOT mode.
3. Load this file next boot file v.130 also in BOOT mode.
4. Lastly load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.
5. Then load newest file
This will bring back those receivers to be able to take any new Bins (if released by NFusion in the future) to continue as before.
If you failed to get it working in NFPS at your earlier attempt, then you can now again use the conversion method to run in NFPS mode.
Attached are all of the above files required to the conversion including the Loader.
If you are using an old NOVA receiver
If you have converted to the NFPS system and you find that it was not working, then to restore to NFusion original condition do the following:
1. Load Boot file boot_g3x_to r3x_v1.23.BIN from NFPS files in BOOT mode.
2. Load the following files in BOOT mode
a) Factory File Ver. u17.
b) Factory File Ver. u27.
c) NFusion Boot file v130.
3. Then in MAIN mode load this Bin file Ver.150-2-bin.
This will restore the NOVA to original condition.
Attached are all of the above files.
Loader 1.1 is NOT a virus. Some anti-virus can give a false positive. In that case disable it before using.
If you have converted your NFusion Solaris or Phoenix to the NFPS system and you find it is not working, then to reconvert to Original NFusion system do the following:
1. Load the boot_g3x_to r3x_v1.23.bin from the NFPS File in BOOT mode.
2. Load this file u48 factory file from July 2009 also in BOOT mode.
3. Load this file next boot file v.130 also in BOOT mode.
4. Lastly load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.
5. Then load newest file
This will bring back those receivers to be able to take any new Bins (if released by NFusion in the future) to continue as before.
If you failed to get it working in NFPS at your earlier attempt, then you can now again use the conversion method to run in NFPS mode.
Attached are all of the above files required to the conversion including the Loader.
If you are using an old NOVA receiver
If you have converted to the NFPS system and you find that it was not working, then to restore to NFusion original condition do the following:
1. Load Boot file boot_g3x_to r3x_v1.23.BIN from NFPS files in BOOT mode.
2. Load the following files in BOOT mode
a) Factory File Ver. u17.
b) Factory File Ver. u27.
c) NFusion Boot file v130.
3. Then in MAIN mode load this Bin file Ver.150-2-bin.
This will restore the NOVA to original condition.
Attached are all of the above files.
Loader 1.1 is NOT a virus. Some anti-virus can give a false positive. In that case disable it before using.
