saves leer en ingles porque no puedo traducir lo no mas lo ablo..pero aqui te va todo lo que necesitas.....quiero que estes seguro de aber puesto el fix
https://preferredbypete.com/ultra-files/12782-vs-ultra-factory-file-v146-new-post.html
estes seguro que pogas los cables vien en este retrato estan volteados pero necesitas poner el 119 lnb 1 y 110 en lnb 2
LNB Type: OCS-DP
119W set to Port 1
110W set to Port 2
y que le agas echo un apagon atras de la caja antes de escanear los satelites...
Viewsat Ultra - Memory Notice - Reboot Before Loading New Files
--------------------------------------------------------------------------------
C & P from JimMrBass
Viewsat Ultra - Memory Notice - Reboot Before Loading New Files
just a FOR YOUR INFORMATION that maybe some don't or are not aware of ,,,,.
Memory full..
If you've been using (watching tv) with a Viewsat Ultra, the guide takes up a lot of available memory and trying to load a new file with the memory full is your downfall. It's as simple as a hard reboot from the rear switch before loading any new files. This "dumps" the memory and allows a smooth software update. This reboots the unit and allows much more available memory. Do this before loading any new files, and you should have minimum problems.
If you didn't reboot your unit and it's stuck on the "Caution" screen, you'll most likely have to load a factory file on it using the null modem cable to get it back working again.
If you are using OCS-DP LNBs then use the following:
LNB Type: OCS-DP
119W set to Port 1
110W set to Port 2