BROWNNOSE
BOOTLICKER
How to load a file?
Most common and easiest way to load files is with the provided USB stick.
Click here for mini files:
Unzip File and copy file to the Portable USB stick.
Take USB stick to STB and press MENU scroll left to Utility and scroll down to USB press OK.
You will see the file on screen choose the file by scrolling to it and press OK.
Choose SW Update and let it load and reboot. The Unit will reboot and you can now scan your sats.
How to scan your sats.
I will cover only the easy most common way. For other options please read the manual.
Press menu
Installations
Channel search (password)
Choose your sats
Choose Diseqc locations
Change LNB frequency to match your setup (11250 usually)
Enter other option according to your setup
Click on search
If all is correct it will scan in the channels
How to download EPG
Press EPG
Press either the RED button for Dish or GREEN for the Bev.
For dish a window will pop up with a status bar that takes 5 minutes to fill the epg.
For BEV it will take a couple minutes with no status bar.
How to manually Change the Keys.
Press menu
scroll left to KEY WORKS
Press OK
Enter the menus by pressing ok
Enter the keys as needed with the buttons as instructed on screen.
Press ok on the options to save.
Basically the OK button is your access into the menus. Pressing it on different options brings you to the next.
To go back press exit.
Takes a few minutes to get used to it but it is one of the easiest to use.
How to choose between sat packages.
Press SAT
choose either ALL, DISH package or BELL package.
This Unit automatically defaults to SID order.
When in ALL the BEV channels will be renumbered into the 10000 (example channel 400 becomes 10400)
when you choose either package the renumbering will be off.
How to edit the Picture quality
Press SORT
Window pops up with adjustments
These settings get defaulted with each factory default if you have a setting you like I recommend writing it down in case a default is needed.
ENJOY ALL
Most common and easiest way to load files is with the provided USB stick.
Click here for mini files:
Unzip File and copy file to the Portable USB stick.
Take USB stick to STB and press MENU scroll left to Utility and scroll down to USB press OK.
You will see the file on screen choose the file by scrolling to it and press OK.
Choose SW Update and let it load and reboot. The Unit will reboot and you can now scan your sats.
How to scan your sats.
I will cover only the easy most common way. For other options please read the manual.
Press menu
Installations
Channel search (password)
Choose your sats
Choose Diseqc locations
Change LNB frequency to match your setup (11250 usually)
Enter other option according to your setup
Click on search
If all is correct it will scan in the channels
How to download EPG
Press EPG
Press either the RED button for Dish or GREEN for the Bev.
For dish a window will pop up with a status bar that takes 5 minutes to fill the epg.
For BEV it will take a couple minutes with no status bar.
How to manually Change the Keys.
Press menu
scroll left to KEY WORKS
Press OK
Enter the menus by pressing ok
Enter the keys as needed with the buttons as instructed on screen.
Press ok on the options to save.
Basically the OK button is your access into the menus. Pressing it on different options brings you to the next.
To go back press exit.
Takes a few minutes to get used to it but it is one of the easiest to use.
How to choose between sat packages.
Press SAT
choose either ALL, DISH package or BELL package.
This Unit automatically defaults to SID order.
When in ALL the BEV channels will be renumbered into the 10000 (example channel 400 becomes 10400)
when you choose either package the renumbering will be off.
How to edit the Picture quality
Press SORT
Window pops up with adjustments
These settings get defaulted with each factory default if you have a setting you like I recommend writing it down in case a default is needed.
ENJOY ALL
